Starting with kernel version 2.6.36 tuxonice has been removed from the zen-sources patchset, the high-performance linux-kernel for desktops. With the new zen-sources-2.6.38_p20110510 ebuild the maintainer of the zen-sources ebuilds started to include tuxonice into the zen-sources ebuilds in gentoos portage tree.  Now the reliable suspend mechanism, tuxonice is known for, is again easily available on genttoo systems with zen-.sources.  Thanks Markos!

A Gentoo user now can choose if he wants to have zen-sources with tuxonice or not. To get zen sources with tuxonice one just has to include the tuxonice USE-flag into his /etc/make.conf and emerge zen-sources afterwards. Then one has to configure and compile the kernel as usual.

Jürgen

(No Ratings Yet)

Loading...

Posted in kernel, linux | No Comments »

Starting with 2.6.36 tuxonice has been removed from zen-sources again. A few days ago the zen-sources-2.6.38_p20110501 ebuild appeared in the gentoo portage tree. So I patched the brand new zen-sources-2.6.38_p20110501 with tuxonice. The official 2.6.38 tuxonice patch from tuxonice.net has worked out of the box, this time.

Suspend to RAM works at least on my Dell Precison M65 and my Desktop, as well as suspend to disk does. Well, I have to mention that I again tried to use BFS, the brain fuck scheduler, to increase (felt) performance. This time the brain fuck scheduler worked well with tuxonice and did not result in the crash during atomic copy, I described in zen-sources-2.6.37_p20110325 with tuxonice.  Thus  I did not have to fall back to the CFS scheduler and automatic control groups as I had to with 2.6.37. However this is also an alternative to the brain fuck scheduler.

Download the zen-sources-2.6.38_p20110501 patch here. Then apply the patch to the vanilla kernel sources avalable from kernel.org. Afterwards download the tuxonice patch from tuxonice.net and apply it. Now you can continue with the standard kernel building process.

For Gentoo users there is a more easy way: Download my modified overlay from zen-sources-2.6.38_p20110501.tar.gz (6902 downloads ) and extract it in /usr/local/portage. Be sure to include the following line in your /etc/make.conf:

PORTDIR_OVERLAY=”/usr/local/portage”

If you want to use tuxonice include toi in your USE-flags. Then emerge zen-sources and build the kernel as you wish.

Tuxonice is not officially supported in current zen-sources. So If you’re using the files above, don’t report any bugs to zen-sources.org. You are on your own.

For my Precision M65 I used the following kernel config: kconfig-zen-toi-m65-2.6.38.zip (7272 downloads )

For more information on the zen-sources patchset see www.zen-sources.org.

best regards

Jürgen

(No Ratings Yet)

Loading...

Posted in kernel, linux | 1 Comment »

Recently I wrote about bino, a stereoscopic video player that is usable with linux and also supports quad buffered stereo. In the meanwhile the first stable version 1.0 has been released. Its main features are:

• Support for 2D and stereoscopic 3D video in a wide variety of input formats and stereo layouts.
• Support for many 3D output methods, including anaglyph glasses, shutter glasses, autostereoscopic displays, 3D TV sets, and distributed multi-display installations such as powerwalls or Virtual Reality installations.

The Gentoo way

For gentoo users here is my overlay including the ebuild: bino-1.0_overlay.tar.gz (3758 downloads ) Download the overlay and extract it in /usr/local/portage. Be sure to include the following line in your /etc/make.conf:

PORTDIR_OVERLAY=”/usr/local/portage”

Then emerge bino and enjoy viewing your 3d movies.

Jürgen

(1 votes, average: 5.00 out of 5)

Loading...

Posted in 3d, gentoo, linux, multimedia | 1 Comment »

During my last kernel upgrade I recognized that the iptables mirror target I published here, here and here and here does not work anymore with kernel version 2.6.37. There were some slight changes in kernel headers. You can download the newer version for 2.6.37 and probably future kernels here:

MIRROR.2.6.37.tar.gz (41548 downloads )

To build the module, boot the kernel you want to use the module with. Afterwards unpack the archive, run the compile.sh script and the install.sh script.

Now you may use the mirror target in place of the reject or drop target in the INPUT, FORWARD and PREROUTING chains, like this in your firewall script:

$IPTABLES -A INPUT -j MIRROR

Beware: The use of the mirror target may have strange results, i.e. if you want to connect to the iptables protected machine, you may end up connecting to the local machine without recognizing it. It also may use much bandwith. Worst case: if you have two machines using this module they may end up playing pingpong. So you have been warned, use with caution and at your own risk. For more information see: MIRROR target.

Downloads for older kernel versions are below. Notice the version numbering 2.6.25 works for kernels up to 2.6.27. 2.6.28 also works for 2.6.29 and 2.6.30 kernels. The 2.6.13 version of the module should work up to kernel version 2.6.16.

MIRROR.2.6.36.tar.gz (43575 downloads ) MIRROR.2.6.35.tar.gz (45633 downloads ) MIRROR.2.6.31 (46053 downloads ) MIRROR.2.6.28.tar.gz (55065 downloads ) MIRROR.2.6.25.tar.gz (54317 downloads ) MIRROR.2.6.24.tar.gz (53641 downloads ) MIRROR.2.6.13.tar.gz (51201 downloads )

regards
Jürgen

(1 votes, average: 5.00 out of 5)

Loading...

Posted in kernel, linux, networking, security | 1 Comment »

Starting with 2.6.36 tuxonice has been removed from zen-sources again. A few days ago the zen-sources-2.6.37_p20110325 ebuild appeared in the gentoo portage tree.  Since I did not want to stick to my old 2.6.35 kernel I patched the brand new zen-sources-2.6.37_p20110325 with tuxonice. The official tuxonice patch from tuxonice.net did not work, so I had to slightly modify it to apply cleanly on zen-sources.

Suspend to RAM works at least on my Dell Precison M65 and my Desktop, as well as suspend to disk does. Well, I have to mention that I wanted to use BFS, the brain fuck scheduler, to increase performance. This resulted in tuxonice freezing during  atomic copy when trying to hibernate, thus I had to use the CFS scheduler again.

Download the zen-sources 2.6.37_p20110325 patch here. Then apply the patch to the vanilla kernel sources avalable from kernel.org. Afterwards download my modified tuxonice patch from here: current-tuxonice-for-2.6.37-for-zen.patch_0 (9606 downloads ) . Then apply it and continue with the standard kernel building process.

For Gentoo users there is a more easy way: Download my modified zen-sources-overlay (including the patches) from zen-sources-toi-2.6.37_p20110325.tar.gz (7848 downloads ) and extract it in /usr/local/portage. Be sure to include the following line in your /etc/make.conf:

PORTDIR_OVERLAY=”/usr/local/portage”

If you want to use tuxonice include toi in your USE-flags. Then emerge zen-sources and build the kernel as you wish. It would be nice if this USE-flag and the ebuild modification find their way into the portage tree.

Tuxonice is not officially supported in current zen-sources. So If you’re using the files above, don’t report any bugs to zen-sources.org. You are on your own.

For my Precision M65 I used the following kernel config: kconfig-zen-toi-m65-2.6.37 (7317 downloads )

For more information on the zen-sources patchset see www.zen-sources.org.

best regards

Jürgen

(No Ratings Yet)

Loading...

Posted in gentoo, kernel, linux | No Comments »

MPO stereo images, that were taken in example using Fujifilm FinePix Real 3D Cameras contain a field parallax in their exif data. The parallax value can be used by stereoscopic viewers like my stereoscopic image viewer SIV to adjust the 3D effect. By manipulating this value one can can customize the strength of the pop out effect and reduce the ghosting effect. This may lead to a more pleasuring viewing experience.

The parallax value can easily be displayed using exiftool:

exiftool -ee -Parallax DSCF0045.MPO

If you want to set the parallax value of an image, this is not that easy, since the value is stored in the exif data of the second embedded jpeg file in the MPO, which is not directly writable with exiftool. However one can find out the beginning of the second file with exiftool, extract the image and then set the parallax value. Afterwards on can put all together again using dd. Doing this manually is a quite awful task, so I wrote a little script for automating it:

#!/bin/bash
#setparallax.sh
#$1: MPO File $2: Parallax value

MPSTART=`exiftool -b -MPImageStart $1`
echo Multipart Image 2 begins at: $MPSTART
let MPSTART=$MPSTART/64
cp -a $1 $1.orig
exiftool $1.orig -mpimage2 -b | exiftool  -b -Parallax=$2 – \
| dd conv=notrunc bs=64 seek=$MPSTART of=$1

Use it at the command line as follows:

setparallax.sh [MPO-File] [new parallax value]

in example:

setparallax.sh DSCF0045.MPO 1.25

For determining the value that matches the visual requirements of your image you may use the parallax adjustment function of SIV (+/- key) and use the value on the OSD and printed out in the console. Perhaps some day I will add the functionality, to directly write the new parallax value to the MPO file, to SIV. However the setparallax script at least gives us the possibility to write the parallax value until then.

Jürgen

(1 votes, average: 5.00 out of 5)

Loading...

Posted in 3d, graphics, linux, tools | 3 Comments »

The current OpenSceneGraph ebuild in the Gentoo Portage tree does not install the OpenSceneGraph sample data set.  These  files include some sample models, fonts, bitmaps etc. used in the OpenSceneGraph examples and other applications.  This is a problem for applications relying on the files to be available. In example my stereoscopic image viewer SIV relies on having the OpenSceneGraph sample dataset installed and fails to load the arial font from the dataset with the following error:

Warning: font file “fonts/arial.ttf” not found.

Here is my modified ebuild resolving this issue: OpenSceneGraph-2.8.3.tar.gz (7752 downloads )

Download the modified ebuild and extract the archive into /usr/local/portage. Be sure to include the following line in your /etc/make.conf:

PORTDIR_OVERLAY=”/usr/local/portage”

If you want to use OpenSceneGraph with ffmpeg support, download the patch from bugs.gentoo.org and copy it to /etc/portage/patches/dev-games/openscenegraph-2.8.3/ as described there, to compile with ffmpeg-0.6. Otherwise the emerge will fail with:

/osgPlugins/ffmpeg/FFmpegAudioStream.hpp:18:9:
error: cannot allocate an object of abstract type
‘osgFFmpeg::FFmpegAudioStream’

Now you can set the examples USE-Flag and emerge openscenegraph to get the example dataset.

If you have got flightgear installed, reinstall simgear afterwards,  like the ebuild requests you to do:

emerge -1 dev-games/simgear

Depending on if you were upgrading or just reinstalling with the new ebuild it may be necessary to run revdep-rebuild to resolve issues with broken libraries. Hopefully the next ebuild in the portage tree will  include the sample data set.

Wxwidgets support seems to be broken with the current version. When using the wxwidgets USE-Flag Openscenegraph fails to compile with, so include

=dev-games/openscenegraph-3.0.1 -wxwidgets

in your /etc/portage/package.use if you have enabled wxwidgets in your make.conf.

best regards

Jürgen

(1 votes, average: 5.00 out of 5)

Loading...

Posted in 3d, graphics, linux, multimedia, programming | No Comments »