I sometimes have the problem that k3b fails to compare a burned disc with an ISO-image because it fails to reload the disk. So I wrote a small script that compares a CD or DVD against an ISO-Image. Since it can be quite handy, I like to share the script with you.

It takes the ISO-image to compare against as first parameter. The second (optional) parameter it takes is the drive, the disc is located in (i.e. /dev/sr0). Commands it needs and that therefore need to be installed on your system are awk, md5sum and pv. Chances are good, that there exist precompiled packages for your distribution. When the comparison is done it prints out whether it succeeded or not and returns 0 on success and   -1 on failure for use from within other programs.

You may download the script from here:

[download#11]

Jürgen

(No Ratings Yet)

Loading...

Posted in linux, tools | No Comments »

Today, during my regular upgrades, I upgraded my gentoo boxes to nvidia-drivers-180.51, which is the latest version in portage. Since the error in dmesg

bluetooth-apple[10079] general protection ip:7fec32b2cebe sp:7fff3dc7ff00 error:
0 in libGL.so.180.51[7fec32ad6000+a5000]

I mentioned in CTRL-C and CTRL-Z not working after nvidia-driver upgrade and high CPU usage and saw in later releases still occurs and therefore I expect more problems, I downgraded to nvidia-drivers-180.29 again.  Since I upgraded  to xorg-server-1.5.3 in the meanwhile, I am sure now, that the problems are not related to incompatibilities with the older xorg release I ran before.

Did anyone monitor the driver release any closer? How were your experiences?

Jürgen

(No Ratings Yet)

Loading...

Posted in 3d, drivers, gentoo, linux | No Comments »

A while ago I wanted to make my iptables firewall a bit active. During my searches I found the iptables mirror target, which takes the packet sent to your machine and  returns the same packet to the machine the packet came from. Thus, let’s say someone tries to scan your machine or tries an attack he would scan his own machine or even attack his own machine.  Sadly the mirror target has been dropped somewhere around linux version 2.5 for security concerns. Somewhere in the web I found sources for a 2.5 kernel version and made them work with some 2.6.

I want to share this with the community now. So you can download the modified modules sources on www.mygnu.de. To build the module, boot  the kernel version you want to use the module with, and unpack the archive. Afterwards run the compile.sh script and the install.sh script.

Now you may use the mirror target in place of the reject or drop target  in the INPUT, FORWARD and PREROUTING chains, like this in your firewall script:

$IPTABLES -A INPUT -j MIRROR

Beware: The use of the mirror target may have strange results, i.e. if you want to connect to the iptables protected machine, you may end up connecting to the local machine without recognizing it. It also may use much bandwith. Worst case: if you have two machines using this module they may end up playing pingpong. So you have been warned, use with caution and at your own risk. For more information see: MIRROR target.

Downloads for the most recent kernel versions are below. Notice the version numbering 2.6.25 works for kernels up to 2.6.27. 2.6.28 also works for 2.6.29 and probably for future kernels. If you need a version for an older kernel, leave a comment. Then I can look if I have a module version archived for the kernel version you need.

[download#12] [download#13] [download#14] [download#45]

Addon: The 2.6.28 version also works for 2.6.30 kernels.

These versions do not work with 2.6.31 kernels. See iptables mirror target for kernel version 2.6.31 or iptables mirror target for kernel version 2.6.35 for the newer ones.

regards

Jürgen

(No Ratings Yet)

Loading...

Posted in kernel, linux, networking, security | 14 Comments »

Some days ago Thorsten wrote TuxOnIce is broken in 2.6.29-zen1. Well, I wanted to have a 2.6.29 kernel, because the iwl3945 driver in 2.6.29 works the first time with a useable speed for me.  So I no longer need the hack for the ipw3945 driver I published on ipw3945 unter linux-kernel 2.6.27.

Today I managed to patch the brand new zen-sources-2.6.29-r3 with tuxonice. This was necessary since I need tuxonice on my notebook and tuxonice has been removed permanently from zen-sources. Suspend to RAM works at least on my Dell Precison M65 as well as suspend to disk does.

Since 2.6.29-zen3 has not been released as patch yet, you may download the patch I created from git here: [download#16] Then apply the patch to the vanilla kernel sources available from kernel.org. Afterwards download the tuxonice patch from http://www.tuxonice.net/downloads/all/tuxonice-3.0-for-2.6.29.patch.bz2 and apply it to the kernel sources with the zen patchset already applied.

For Gentoo users there is a more easy way:

Download my modified overlay  (including the patches) from [download#17] and extract it in /usr/local/portage. Be sure to include the following line in your /etc/make.conf:

PORTDIR_OVERLAY="/usr/local/portage"

Then emerge zen-sources-toi and buld the kernel as you wish.

The files above are not from an official zen release. Tuxonice is not officially supported in zen-sources. So If you’re using the files above, don’t report any bugs to zen-sources.org.

For my Precision M65 I used the following kernel config: [download#18]

If you want to use all channels with the iwl3945 driver change the line

static char *ieee80211_regdom = “US”;

to

static char *ieee80211_regdom = “JP”;

in the file net/wireless/reg.c.

For more information on the zen-sources patchset see www.zen-sources.org.

best regards

Jürgen

(No Ratings Yet)

Loading...

Posted in drivers, gentoo, kernel, linux, zen-sources | 1 Comment »

Today there was xorg-server-1.5.3 in the portage of gentoo as stable. But there are some hints on it. Now hal and evdev are recommended. If you haven’t used it till now, you have to. If you have emerged hal and evdev ( emerge hal evdev -uND ) you have to copy the policys for hal to /etc/hal/fdi/policy/ . The default policys can be found in /usr/share/hal/fdi/policy. Then ’emerge xorg-server -uND’ and do the things mentioned in the emerge message. If everything is emerged you can go on with renaming of /etc/X11/xorg.conf to xorg.conf.old . Then you can stop x and generate a default xorg.conf with Xorg -configure and copy the generated file to /etc/X11/xorg.conf . Then xorg should start probably. Now you can configure everything you wan’t, perhaps you should read on wiki.x.org about what is new and howto deal with this version. Further details can be found at gentoo.org and if there is a problem we might help you.

LG xexplorer

(No Ratings Yet)

Loading...

Posted in graphics, linux | No Comments »

I’m proud to present a new version of SIV, the stereoscopic jps viewer for Linux I published first in SIV – a stereoscopic jps viewer for Linux. SIV is  capable of displaying jps stereo images in different stereo modes. I tried it in fullscreen/windowed mode with anaglyphic and quad buffered stereo mode. Different output devices I tested were my Vuzix VR920 and relevator shutter glasses  on Nvidia Quadro FX 350M and FX 3400. It should also work with an Ati FireGL, but I never tried this. The new version fixes some segfaults, that occured when needed libraries were missing. Furthermore I added a slideshow mode and the possibility to specify a default distance and therefore the possibility to set a default zoom factor. The coolest feature I added to the viewer is the headtracking support for the Vuzix VR920 HMD. For this you will need (in addition to the device 😉 ) the headtracking driver, I published in VR920 headtracking driver for Linux. You may watch  a video (demo_siv_headtracking_vr920) of me using the viewer with enabled headtracking to view some photos of NASA’s Apollo missions  downloadable from nvidia forums.

Usage changes:

New commandline options are:

• -s                                         Enable slideshow mode
• -t                                         delay Delay for slideshow mode,
  defaults to 10 sec
• -d                                         distance (values between 0.0 and
  1.0 are senseful)

These new options control the new headtracking support:

• –vr920                             enable headtracking support for the vuzix vr920 hmd
• -m                                        non default multicast ip
• -p                                         non default multicast port

For detailed information on the -m and -p options see the article about the headtracking driver : VR920 headtracking driver for Linux. They have the corresponding meaning. If you want to try out the headtracking, enable the headtracking support with the –vr920 option. You may want to specify the distance to the image with the -d option. Values between 0.25 and 0.5 seem to have a nice effect when using the headtracking. When headtracking is active you may press Z to set the zero view so that with your current head position you will see the center of the image. If you want to manipulate the view manually press 2 to enable the trackball manipulator and use i.e. the right moue button and up or down movements (with the mouse) to control the distance (zoom in or out). Afterwards press 1 to activate headtracking again.

For more usage documentation see: SIV – a stereoscopic jps viewer for Linux

Download:      

I decided to publish the viewer under the creative common noncommercial license. Make sure you have the OpenSceneGraph library installed before trying to compile or run the viewer. You may download the full source (Eclipse Project) from here: [download#9] or an x86_64 binary from here:  [download#10]. More binary formats may be available in the future. Fore the x86_64 binary you’ll need OpenSceneGraph-2.8.

Binaries for most linux distributions can be downloaded from www.openscenegraph.org.  Instructions on how to build OpenSceneGraph on gentoo can be found on PlopByte.

Building from source:

For building from source unpack the zip and cd to siv/Release and run make.

Footnote:

If you like the viewer, feel free to link to www.mygnu.de. To request commercial licenses contact us at info(at)mygnu.de. Well, if you just want to support our work on MyGNU.de use the donate button 😉

best regards and enjoy the 3rd dimension

Jürgen

(1 votes, average: 5.00 out of 5)

Loading...

Posted in 3d, drivers, graphics, linux | 6 Comments »

Today, when I ran the regular update of my gentoo systems there was an update for compiz-fusion in portage. The compiz update did not work out of the box on my x8_64 systems, missing keywords, blocking packages, wrong manifests, etc.

Here is the way I got it to work:

emerge -uND world

!!! All ebuilds that could satisfy “~x11-plugins/compiz-plugins-main-0.8.2” have been masked.
!!! One of the following masked packages is required to complete your request:
– x11-plugins/compiz-plugins-main-0.8.2 (masked by: ~amd64 keyword)

Add to /etc/portage/package.keywords:

=x11-plugins/compiz-plugins-main-0.8.2 **
=x11-plugins/compiz-plugins-unsupported-0.8.2 **
=x11-plugins/compiz-plugins-extra-0.8.2 **

emerge compiz-fusion

[blocks B ] x11-plugins/compiz-fusion-plugins-extra (“x11-plugins/compiz-fusion-plugins-extra” is blocking x11-plugins/compiz-plugins-extra-0.8.2)
[blocks B ] x11-plugins/compiz-fusion-plugins-main (“x11-plugins/compiz-fusion-plugins-main” is blocking x11-plugins/compiz-plugins-main-0.8.2)
[blocks B ] x11-plugins/compiz-fusion-plugins-unsupported (“x11-plugins/compiz-fusion-plugins-unsupported” is blocking x11-plugins/compiz-plugins-unsupported-0.8.2)

emerge -C compiz-fusion-plugins-extra compiz-fusion-plugins-main compiz-fusion-plugins-unsupported

emerge compiz-fusion

!!! A file listed in the Manifest could not be found: /usr/portage/x11-plugins/compiz-plugins-extra/files/compiz-plugins-extra-no-gconf.patch

ebuild /usr/portage/x11-plugins/compiz-plugins-extra/compiz-plugins-extra-0.8.2.ebuild digest

Note: The generation of the digest is only a temporary solution. There should be the correct manifest in the portage tree.

emerge compiz-fusion

* Messages for package x11-wm/emerald-0.8.2:

* Cannot find $EPATCH_SOURCE! Value for $EPATCH_SOURCE is:
*
* /usr/portage/x11-wm/emerald/files/emerald-ru.po.patch
* ( emerald-ru.po.patch )
*
* ERROR: x11-wm/emerald-0.8.2 failed.

cd /usr/portage/x11-wm/emerald/files/

ln -s emerald-0.7.8-ru.po.patch emerald-ru.po.patch

Note: The symlink is only a temporary solution. The file should be added to the portage tree.

ebuild /usr/portage/x11-wm/emerald/emerald-0.8.2.ebuild digest

emerge compiz-fusion

Afterwards I had a working compiz-fusion-0.8.2 .

regards

Jürgen

(No Ratings Yet)

Loading...

Posted in 3d, gentoo, graphics, linux | 2 Comments »