Generated by All in One SEO v4.9.10, this is an llms.txt file, used by LLMs to index the site. # MyGNU.de This blog is about GNU, which is a major part of any Linux distribution. ## Sitemaps - [XML Sitemap](https://www.mygnu.de/sitemap.xml): Contains all public & indexable URLs for this website. ## Posts - [iptables mirror target for linux kernel 6.18](https://www.mygnu.de/2025/12/iptables-mirror-target-for-linux-kernel-6-18/) - After my last kernel upgrade I tried to build the iptables mirror target that I have published the last time here. The iptables mirror target takes the packet sent to your machine and returns the same packet to the machine the packet came from. Thus, let's say someone tries to scan your machine or tries - [iptables mirror target for kernel version 2.6.36](https://www.mygnu.de/2010/12/iptables-mirror-target-for-kernel-version-2-6-36/) - During my last kernel upgrade I recognized that the iptables mirror target I published here, here and here does not work anymore with kernel version 2.6.36. You can download the newer version for 2.6.36 and probably future kernels here: To build the module, boot the kernel you want to use the module with. Afterwards unpack - [Flightgear with VR920 headtracking](https://www.mygnu.de/2011/03/flightgear-with-vr920-headtracking/) - Recently I basically got Flightgear to work with quad buffered stereo. The only thing that was still missing for having the Vusix VR920 head mounted display fully supported in the flight simulator was headtracking. However, with my new headtracking driver, VR920 headtracking in Flightgear is possible at last. A good part of the work has - [Flightgear-2.4.0 with quad buffered stereo](https://www.mygnu.de/2011/11/flightgear-2-4-0-with-quad-buffered-stereo/) - In the post Flightgear with quad buffered stereo I have written about how to get quad buffered stereo to work with the famous flight simulator FlightGear. Recently FlightGear-2.4.0 has been released. The problem with quad buffered stereo still persists with FlightGear-2.4.0 . One expects to enable stereoscopic mode in FlightGear starting it with the following - [iptables mirror target for linux kernel 3.0.7](https://www.mygnu.de/2011/12/iptables-mirror-target-for-linux-kernel-3-0-7/) - After my last kernel upgrade I recognized that the iptables mirror target I published here does not work anymore with kernel version 3.0. There were some changes in kernel code. Thus I had to modify the iptables mirror target again to make it work with current kernel versions. You can download the newer release for - [zen-sources-3.0 with tuxonice](https://www.mygnu.de/2012/01/zen-sources-3-0-with-tuxonice/) - Starting with the 2.6.36 kernel, tuxonice has been removed from zen-sources. The latest tuxonice patch that is available is for the linux kernel 3.0. So I patched the zen-stable-3.0 sources with tuxonice. Hopefully a patch for more recent kernel versions will be available soon. Suspend to RAM works with this kernel, at least on my - [zen-sources-3.1 with tuxonice](https://www.mygnu.de/2012/02/zen-sources-3-1-with-tuxonice/) - Starting with the 2.6.36 kernel, tuxonice has been removed from zen-sources. The latest official tuxonice patch that is available is for the linux kernel 3.0. However, I found a more recent patch at gmane.org. So I patched the zen-stable-3.1 sources with this tuxonice patch. Suspend to RAM works with this kernel, at least on my - [Unboxing the Astro Slide](https://www.mygnu.de/2022/12/unboxing-the-astro-slide/) - Like I did when receiving the Cosmo Communicator, I want to share the first impressions while unboxing the brand new Astro Slide, I have received yesterday. About two and a half years ago I have backed Planet Computers Astro Slide Indiegogo campaign. Again Planet Computers has promised a device that is different from anything else, - [devolo-dlan-cockpit-5.2.0.185 with gentoo](https://www.mygnu.de/2022/04/devolo-dlan-cockpit-5-2-0-185-with-gentoo/) - One year ago I have posted a gentoo ebuild for the devolo dlan cockpit software in the article devolo-dlan-cockpit-5.1.6.2 with gentoo. In the meanwhile Devolo has published a newer version. The new version 5.2.0.185 feels more or less the same as the old one, but most probably some bugs have been fixed. The main purposes - [Using the BME680 sensor with nvidia jetson boards part I](https://www.mygnu.de/2021/11/using-the-bme680-sensor-with-nvidia-jetson-boards-part-i/) - Bosch's BME680 is a very interesting component. It is a four in one sensor, which can measure temperature, humidity, pressure and air quality. Unfortunately there is no official support for using the sensor with arm64 linux. This article shows a kernel based approach to use this sensor with NVIDIA's arm64 based Jetson boards. Connecting the - [Using CreationWorkshop on Linux with NVIDIA graphics](https://www.mygnu.de/2021/12/using-creationworkshop-on-linux-with-nvidia-graphics/) - The Resin 3D DLP printer Wanhao Duplicator 7 originally has been offered with the free slicing software Creation Workshop available for download.1 Later on Wanhao seems to have bought the software company behind Creation Workshop and have developed new version, Wanhao D7 Workshop. The original download locations for the free software vanished. Users who have - [Avoid message loops with FHEM2FHEM](https://www.mygnu.de/2018/12/avoid-message-loops-with-fhem2fhem/) - Multiple instances of the open source server for house automation FHEM running on different machines can communicate using the FHEM2FHEM¹ module. Unfortunately one runs into big trouble when trying to use the module bidirectionally. FHEM2FHEM reads events from a remote FHEM instance. When using declarations like the following on both sides this results in an - [iptables mirror target for linux kernel 5.4](https://www.mygnu.de/2020/02/iptables-mirror-target-for-linux-kernel-5-4/) - After my last kernel upgrade I tried to build the iptables mirror target that I have published the last time here. The iptables mirror target takes the packet sent to your machine and returns the same packet to the machine the packet came from. Thus, let's say someone tries to scan your machine or tries - [devolo-dlan-cockpit-5.1.6.2 with gentoo](https://www.mygnu.de/2021/03/devolo-dlan-cockpit-5-1-6-2-with-gentoo/) - Quite a while ago I have posted a gentoo ebuild for the devolo dlan cockpit software in the article devolo-dlan-cockpit-4.2.3 with gentoo. After having purchased some devolo Magic 2 PowerLan adapters to extend the existing Devolo dlan 1200 network, I have found out that the old version 4.3.3 of devolo-dlancopit does not support the new - [VRTrack 1.0 - headtracking driver for the vr920 HMD](https://www.mygnu.de/2011/03/vrtrack-1-0-headtracking-driver-for-the-vr920-hmd/) - As I promised in New version of the vr920 headtracking driver coming soon here is the new version of my headtracking driver for the Vuzix VR920 iwear for Linux. It calculates yaw, pitch and roll from the accelerometer and magnetometer data (The device has got three of each). This makes a 3DOF tracking possible and - [SIV 1.1 released](https://www.mygnu.de/2010/12/siv-1-1-released/) - I am proud to present a new version of SIV, the stereoscopic image viewer for Linux I published on MyGNU.de. It should be compilable also on MacOS and Windows, but I have never tested this. SIV is capable of displaying JPS stereo images and MPO stereo images in different stereo modes. It is tested in - [exFAT/NTFS support for the Cosmo Communicator](https://www.mygnu.de/2020/02/exfat-support-for-the-cosmo-communicator/) - Unfortunately the Cosmo Communicator, like many other Android phones, does not support the exFAT filesystem. Most vendors do so due to exFAT being covered by software patents in the USA, which is a problem for companies selling to the USA. exFAT might not be the most sophisticated filesystem available, but is needed for interoperability with - [Pimp up your internet tablet](https://www.mygnu.de/2010/05/pimp-up-your-internet-tablet/) - Did you ever ask yourself how to make your internet tablet more powerful? For a Linux based device like Nokias N810 this question is quite easy to answer. You can easily increase overall performance and responsiveness by using a "better" kernel than the stock kernel on your internet tablet. A further advantage is that you - [Unboxing the Cosmo Communicator](https://www.mygnu.de/2019/11/unboxing-the-cosmo-communicator/) - Like I did when receiving the Gemini PDA, I want to share the first impressions while unboxing the brand new Cosmo Communicator, I have received today. About one year ago I have backed Planet Computers Cosmo Communicator Indiegogo campaign. Planet Computers has promised a device that is different from anything else, that is available for - [Libreoffice update failure](https://www.mygnu.de/2019/02/libreoffice-update-failure/) - Today, when updating the Debian OS on my Gemini PDA, the upgrade for libreoffice failed complaining about the file dialog.xlc being present in multiple packages. A similar issue already has occurred with the Gemini PDA half a year ago¹. It is quite probable, that the same problem occurs with other Debian based distributions, as well. - [Modular kernel for the Gemini PDA available from the gemian repository](https://www.mygnu.de/2019/04/modular-kernel-for-the-gemini-pda-available-from-the-gemian-repository/) - Recently Adam Boardman and I have managed to integrate the modular kernel for the Gemini PDA into the gemian kernel repository. So, from now on, whenever the kernel gets improved, the modular kernel gets built and the update is available for Debian via apt. Installing the modular kernel From now on, the modular kernel for - [Modular Linux kernel for the Gemini PDA with cut+paste fix](https://www.mygnu.de/2019/03/modular-linux-kernel-for-the-gemini-pda-with-cutpaste-fix/) - Using Debian with the Gemini PDA one can use cut and paste, for example in QTerminal, using the key combinations [Ctrl]+[Shift]+ and [Ctrl]+[Shift]+[v]. Unfortunately this did not work using the left Shift key. There is no need to fiddle with the keyboard configuration to fix this, since it is a kernel issue. Again Adam Boardman - [Recovery from a failed kernel upgrade on Lamobo R1](https://www.mygnu.de/2019/02/recovery-from-a-failed-kernel-upgrade-on-lamobo-r1/) - Yesterday I have updated my Lamobo R1 router board running Debian Stretch the usual way with apt update;apt upgrade. This time many updates were involved including a kernel update from 4.9.130-2 to 4.9.144-3. After rebooting the device it did not come up again. The same happens with the 4.9.144-3 kernel and the Bananapi board which - [Building a kernel module for the awus1900 Wifi stick and the Gemini PDA](https://www.mygnu.de/2019/02/building-a-kernel-module-for-the-awus1900-wifi-stick-and-the-gemini-pda/) - A few days ago I have been asked if it is possible to build a driver for the awus1900 Wifi stick for the Gemini PDA. To be honest, I did not know, so I gave it a try. The awus1900 uses Realtek's rtl8814au chipset. The Linux driver for this chipset is available at many locations - [Modular Linux kernel for the Gemini PDA with lid close fix](https://www.mygnu.de/2019/02/modular-linux-kernel-for-the-gemini-pda-with-lid-close-fix/) - Sometimes, well, quite often, maybe one out of twenty times when closing the lid, the Gemini PDA running Debian did not turn off the screen and go to sleep, because of keys being pressed by the closing screen before the keyboard gets turned off. When one recognized the Gemini getting hot in the pocket already - [Modular Linux kernel for the Gemini PDA with FOTA5 fixes](https://www.mygnu.de/2018/12/modular-linux-kernel-for-the-gemini-pda-with-fota5-fixes/) - Recently the fixes in Planet Computers over the air update found their way into the Gemini Linux kernel sources. Thus the Linux kernel binaries I have shared before are a bit outdated now. So I have decided to build another kernel from the newer kernel sources with the following configuration changes with respect to the - [Using the auto power on feature with the NVIDIA Jetson TX2 development kit](https://www.mygnu.de/2018/11/using-the-auto-power-on-feature-with-the-nvidia-jetson-tx2-development-kit/) - There has been a discussion about enabling the auto power on feature of the Jetson TX2 development kit on devtalk.nvidia.com. The solutions discussed there involved using a additional micro controller or soldering directly on the quite expensive board which is not desired by quite some users. This article will show a fairly simple and quite - [Improved modular Linux kernel for the Gemini PDA](https://www.mygnu.de/2018/07/improved-modular-linux-kernel-for-the-gemini-pda/) - The linux kernel binary I have shared in the article Modular Linux kernel for the Gemini PDA turned out to lack some important features, like not supporting the ethernet port of the Planet Computers USB hub. Thus a second version of the kernel had to be built. In addition to the original changes, the following changes - [Another improved modular Linux kernel for the Gemini PDA](https://www.mygnu.de/2018/09/another-improved-modular-linux-kernel-for-the-gemini-pda/) - The time has come for another modular linux kernel for the Gemini PDA. The linux kernel binaries I have shared before were lacking proper USB pendrive support. Whenever a drive got connected it froze and the device begun behaving strange, in example it has been impossible to open applications afterwards. Furthermore, in the meanwhile the - [Modular Linux kernel for the Gemini PDA](https://www.mygnu.de/2018/06/modular-linux-kernel-for-the-gemini-pda/) - For the Debian Technology Preview image for the Gemini PDA a monolithic kernel has been used. In order to get as many peripherals as possible working a modular kernel is necessary. So I decided to build a custom kernel. Since the suspend on lid close feature only works with the community kernel, the kernel source - [Micro SD card performance with the Gemini PDA](https://www.mygnu.de/2018/07/micro-sd-card-performance-with-the-gemini-pda/) - Recently, when writing the article Some first tests with the Gemini PDA, I have noticed the ridiculous slow micro SD card I/O performance with Android. Because of this, later on, I did some further testing with Debian installed on the Gemini. After booting the device, the micro SD card read speed looks good, but after - [Some first tests with the Gemini PDA](https://www.mygnu.de/2018/06/some-first-tests-with-the-gemini-pda/) - Last week my Gemini PDA has arrived. There have been some problems with devices from the first batch especially regarding the keyboard and the device not containing the X27 SoC but a X25 SoC. At least one later device also has been reported being powered by the X25 SoC. Thus I wanted to do some - [Unboxing of the Gemini PDA](https://www.mygnu.de/2018/06/unboxing-of-the-gemini-pda/) - What is going on here? An unboxing article on MyGNU.de? Well, this is the exception, since the Gemini is an exceptional device like Nokias N900 has been before and in the future hopefully the some day finished Neo900 might be. Well, I do not want to stray away any further. About 13 month ago I - [iptables mirror target for linux kernel 4.10](https://www.mygnu.de/2017/11/iptables-mirror-target-for-linux-kernel-4-10/) - After my last kernel upgrade I tried to build the iptables mirror target published the last time here. The iptables mirror target takes the packet sent to your machine and returns the same packet to the machine the packet came from. Thus, let's say someone tries to scan your machine or tries an attack he - [devolo-dlan-cockpit-4.3.3 with gentoo](https://www.mygnu.de/2017/11/devolo-dlan-cockpit-4-3-3-with-gentoo/) - Recently I have found out, that the version 4.2.3 of devolo-dlancopit, for which I have posted a gentoo ebuild in the article devolo-dlan-cockpit-4.2.3 with gentoo, does not work fully anymore. It fails downloading firmware updates for the Devolo dlan 1200 PowerLAN adapters. Most probably the download urls for firmware updates have changed recently. Devolo offers - [Minidlna patch for LG TVs](https://www.mygnu.de/2016/06/minidlna-patch-for-lg-tvs/) - One year ago I wrote about using the ushare DLNA server for watching 3D stereo mpo images. In the meanwhile minidlna evolved and is now also capable of displaying the mpo file format. This led me to switching to minidlna as DLNA server, since it is the better DLNA-server for general use. In example it - [devolo-dlan-cockpit-4.2.3 with gentoo](https://www.mygnu.de/2015/01/devolo-dlan-cockpit-4-2-3-with-gentoo/) - Recently I have started using Devolo dlan 1200 PowerLAN adapters. With these one can get a network with up to 1Gbps without having to install additional wires by using the power lines. Of course the 1Gbps are optimum values under perfect conditions. Practically one gets 100 Mbps to 600 Mbps, but this is enough for most - [watching 3D stereo mpo images with ushare](https://www.mygnu.de/2015/01/watching-3d-stereo-mpo-images-with-ushare/) - Some months ago I got my brand new LG 55LA6608 3D TV. Of course I wanted to watch the 3d photos taken with the Fujifilm Finepix Real 3D camera with it. The images taken by the camera are being stored using the MPO file format. These images consist of two jpeg images and some metadata inside - [iptables mirror target for linux kernel 3.6](https://www.mygnu.de/2013/01/iptables-mirror-target-for-linux-kernel-3-6/) - After my last kernel upgrade I tried to build the iptables mirror target published the last time here. The iptables mirror target takes the packet sent to your machine and returns the same packet to the machine the packet came from. Thus, let's say someone tries to scan your machine or tries an attack he - [stereoscopic mplayer-1.1-r1](https://www.mygnu.de/2012/12/stereoscopic-mplayer-1-1-r1/) - Recently the new mplayer-1.1-r1 ebuild appeared in portage. In the article stereoscopic mplayer-1.0_rc4_p20110322 I provided a modified patch for stereoscopic support in mplayer-1.0_rc4_p20110322. This patch does not work with the current version anymore. However, only a minor fix has been required. To use the new patch, just download it from here: and copy it to: - [Flightgear-2.8.0 with quad buffered stereo](https://www.mygnu.de/2012/09/flightgear-2-8-0-with-quad-buffered-stereo/) - In the article Flightgear with quad buffered stereo I have written about how to get quad buffered stereo to work with the famous flight simulator FlightGear. Recently FlightGear-2.8.0 has been released. The problem with quad buffered stereo still persists with FlightGear-2.8.0 . One expects to enable stereoscopic mode in FlightGear starting it with the following - [Looking up phone numbers with the N900](https://www.mygnu.de/2012/02/looking-phone-numbers-with-the-n900/) - Who does not know this situation. One returns to the phone and recognizes a missed call. Then one usually wants to know who the caller is, but the phone only displays an unknown phone number. Usually the next step is to google the number or use a reverse number search to see who called, or - [Fixing location awareness of N900 IM](https://www.mygnu.de/2012/09/fixing-location-awareness-of-n900-im/) - Nokias N900 cellular phone is a location aware device. Usually it has been able to display your location in the status message of instant messaging services like Jabber or Skype. This function has stopped working completely some time ago. This article describes the underlying problem and presents a fix to restore the function again. Usually - [zen-sources-3.2 with tuxonice](https://www.mygnu.de/2012/03/zen-sources-3-2-with-tuxonice/) - Starting with the 2.6.36 kernel, tuxonice has been removed from zen-sources. The latest official tuxonice patch, that is available at present, is for the linux kernel 3.0. In the meanwhile more recent patches, for kernel version 3.2.1 and 3.2.10, have appeared at crow202.org. So I patched the zen-stable-3.2 sources with the 3.2.1 tuxonice patch from - [osgocean ebuild for gentoo](https://www.mygnu.de/2009/06/osgocean-ebuild-for-gentoo/) - I just recognized the osgocean release on the osg mailing-list. Osgocean is a library that one can use to render water effects in a very realistic way. It was used to generate the above and below water effects in the VENUS project. For more information on the osgocean project see: osgocean You can see how - [Maemo 5 PR1.2 is out now](https://www.mygnu.de/2010/05/maemo-5-pr1-2-is-out-now/) - I´ve bought a N900, but there were some problems with qt, which should be fixed with this release from Nokia. Here you can get the latest firmware for the N900 and here you can read How to flash it here. I will flash my device tonight and inform you about it. stay tuned ..... LG - [php-5.4.1_rc1 fails with apache-2.4.1 on gentoo](https://www.mygnu.de/2012/04/php-5-4-1_rc1-fails-with-apache-2-4-1-on-gentoo/) - Today the apache-2.4.1 ebuild has appeared in gentoos portage tree. Emerging php-5.4.1_rc1 fails with installed apache-2.4.1 web server on gentoo with the following error message: Configuring SAPI modules checking for AOLserver support... no checking for Apache 1.x module support via DSO through APXS... no checking for Apache 1.x module support... no checking whether to enable - [glsldevil binaries](https://www.mygnu.de/2012/05/glsldevil-binaries/) - About one year ago I wrote about the OpenGL/GLSL debugger glsldevil in the article gentoo ebuild for glsldevil-1.1.5 and provided a gentoo ebuild for it. Unfortunately glsldevil seems not to be available anymore from the web page of the University of Stuttgart (http://cumbia.informatik.uni-stuttgart.de/glsldevil/), which has rendered the ebuild useless. Edit 29/5/2012: The original download site of - [FlightGEAR 2.0.0 on GENTOO](https://www.mygnu.de/2010/03/flightgear-2-0-0-on-gentoo/) - I have searched for a 3D game on Linux and found this nice flight simulation. In Gentoos portage tree there is only an old version avaiable, so I wrote an ebuild for the new version. It compiles fine on my computer wth 64bit Gentoo - Linux. The Power of my graphics board (nVidia Corporation Quadro - [iptables mirror target for linux kernel 3.3](https://www.mygnu.de/2012/03/iptables-mirror-target-for-linux-kernel-3-3/) - After my last kernel upgrade I tried to build the iptables mirror target published here. The iptables mirror target takes the packet sent to your machine and returns the same packet to the machine the packet came from. Thus, let's say someone tries to scan your machine or tries an attack he would scan his - [zen-sources-2.6.30-r3 with tuxonice](https://www.mygnu.de/2009/08/zen-sources-2-6-29-r3-with-tuxonice/) - Today I managed to patch the brand new zen-sources-2.6.30-r3 with tuxonice. This was necessary since I need tuxonice on my notebook for suspend modes and tuxonice has been removed permanently from zen-sources. Suspend to RAM works at least on my Dell Precison M65 as well as suspend to disk does. Download the zen-sources 2.6.30-zen3 patch - [Vultures-2.2.100 ebuild for gentoo](https://www.mygnu.de/2010/03/vultures-2-2-100-ebuild-for-gentoo/) - Some years ago I played nethack on my old PC. Nethack is a Diablo like RPG that was originally released in 1987. Before playing a game, you have to create a character. You can choose between different character classes: Archeologist, Barbarian, Caveman, Healer, Knight, Monk, Priest, Ranger, Rogue, Samurai, Tourist Valkyrie and Wizard. These classes - [Staroffice 8 crash on amd64](https://www.mygnu.de/2011/09/staroffice-8-crash-on-amd64/) - Today I recognized my Staroffice 8 not starting any more on my gentoo box. I know, StarOffice is old, but it is still doing the job and most newer word processors just have tons of more features that, to be honest, most people do not use. For most real work I use Latex, but StarOffice - [zen-sources-2.6.37_p20110325 with tuxonice](https://www.mygnu.de/2011/03/zen-sources-2-6-37_p20110325-with-tuxonice/) - Starting with 2.6.36 tuxonice has been removed from zen-sources again. A few days ago the zen-sources-2.6.37_p20110325 ebuild appeared in the gentoo portage tree. Since I did not want to stick to my old 2.6.35 kernel I patched the brand new zen-sources-2.6.37_p20110325 with tuxonice. The official tuxonice patch from tuxonice.net did not work, so I had - [udev-182 needs CONFIG_ DEVTMPFS in kernel](https://www.mygnu.de/2012/03/udev-182-needs-config_-devtmpfs-in-kernel/) - After the latest upgrades on my gentoo vserver system running a 3.3.0 Linux vserver-kernel (vserver-sources-2.3.3.1), the system did not start up properly anymore. No kernel modules got loaded and even the network devices have not been available after a reboot. This is more or less the worst case, since then one has to be physically - [One hundredth article anniversary](https://www.mygnu.de/2012/03/one-hundredth-article-anniversary/) - We, the authors of MyGNU.de are proud to celebrate an anniversary today. This is the one hundredth article published on this blog. But how does one celebrate such an anniversary? For sure, the best way is to write another article. Well, and perhaps drinking a beer or two. Lets summarize some history. This blog, MyGNU.de - [New version of SIV coming soon](https://www.mygnu.de/2009/03/new-version-of-siv-coming-soon/) - I just fixed some bugs and implemented a slideshow mode in SIV, the viewer for stereoscopic jps images, I published in SIV - a stereoscopic jps viewer for Linux. As I wrote before in VR920 headtracking driver for Linux I want to extend the viewer using the tracking data from the VR920 HMD, so one - [Small bugfix in extcalllog callerid modification for N900](https://www.mygnu.de/2012/03/small-bugfix-in-extcalllog-callerid-modification-for-n900/) - In the article Looking up phone numbers with the N900 I described a solution to perform reverse phone number lookups from within the N900s extended call log. The patch and thus also the binary package there contained a small bug. Whenever there were international calls, beginning with "00", in the log, the reverse lookup failed - [qemu-kvm with cache=none fails on ext4 filesystem with journal_data option](https://www.mygnu.de/2012/02/qemu-kvm-with-cachenone-fails-on-ext4-filesystem-with-journal_data-option/) - Kvm has become one of the major virtualization technologies the last years. For Redhat Linux it has even become the default virtualization solution. Kvm´s IO performance is hardly competitive to other virtualization solutions when using the default options. Especially when using qcow2 images, the IO performance of kvm/qemu can be greatly improved by disabling the - [nvidia-drivers-295.17 solve black screen problem](https://www.mygnu.de/2012/02/nvidia-drivers-295-17-solve-black-screen-problem/) - Using nvidia linux drivers from version 270.X to 275.X with some graphics boards, in example the Quadro FX 350M which is built into the Dell Precision M65 notebook, resulted in a black screen or window for OpenGL applications. Even glxgears did only output a black window. The problem has been discussed on forums.opensuse.org. A downgrade - [iptables mirror target for linux kernel 3.1](https://www.mygnu.de/2012/02/iptables-mirror-target-for-linux-kernel-3-1/) - The iptables mirror target takes the packet sent to your machine and returns the same packet to the machine the packet came from. - [Imagine a World Without Free Knowledge](https://www.mygnu.de/2012/01/imagine-a-world-without-free-knowledge/) - We support the January 18th Wikipedia blackout to protest SOPA and PIPA. Show your support here http://tinyurl.com/7vq4o8g Some other ways to strike from sopastrike.com Zachary Johnson's blackout page ProtestSOPA.org CloudFlare's Stop Censorship app SOPA Strike Wordpress Plugin On Jan 24th, Congress will vote to pass internet censorship in the Senate, even though the vast majority of - [SIV-1.0 released](https://www.mygnu.de/2009/04/siv-10-released/) - I'm proud to present a new version of SIV, the stereoscopic jps viewer for Linux I published first in SIV - a stereoscopic jps viewer for Linux. SIV is capable of displaying jps stereo images in different stereo modes. I tried it in fullscreen/windowed mode with anaglyphic and quad buffered stereo mode. Different output devices - [VR920 headtracking driver for Linux](https://www.mygnu.de/2009/03/vr920-headtracking-driver-for-linux/) - As I promised in VR920 Headtracking driver development here comes a usable version of my headtracking driver for the Vuzix VR920 iwear for Linux. Again I want to thank MalMal of Vuzix Forums, from whose code I was able to learn how to read the Sensor data out of the device via USB. For general - [SIV - a stereoscopic jps viewer for Linux](https://www.mygnu.de/2009/03/siv-a-stereoscopic-jps-viewer-for-linux/) - As promised in JPS-viewer for linux, here comes the very first release of SIV, the first available Stereoscopic Image Viewer for Linux supporting quad buffered stereo. Well this is not 100% correct, since it is build upon OpenSceneGraph it is somewhat platform independant and schould compile well on windows, mac and unix platforms. However, I - [Vuzix VR920 with Linux and active 3D stereo](https://www.mygnu.de/2009/02/vuzix-vr920-with-linux-and-active-3d-stereo/) - I recently received my VR920 3D stereo glasses from USA. A detailed review of the device can be found here : Introducing the Vuzix iWear VR920. A photo of the VR920 can be seen below: The device of course works flawlessly using Windows. The situation under Linux is a bit different, due to missing driver - [Upgrade to compiz-fusion-0.8.2](https://www.mygnu.de/2009/04/upgrade-to-compiz-fusion-082/) - Today, when I ran the regular update of my gentoo systems there was an update for compiz-fusion in portage. The compiz update did not work out of the box on my x8_64 systems, missing keywords, blocking packages, wrong manifests, etc. Here is the way I got it to work: emerge -uND world !!! All ebuilds - [zen-sources-2.6.29-r3 with tuxonice](https://www.mygnu.de/2009/04/zen-sources-2629-r3-with-tuxonice/) - Some days ago Thorsten wrote TuxOnIce is broken in 2.6.29-zen1. Well, I wanted to have a 2.6.29 kernel, because the iwl3945 driver in 2.6.29 works the first time with a useable speed for me. So I no longer need the hack for the ipw3945 driver I published on ipw3945 unter linux-kernel 2.6.27. Today I managed - [iptables MIRROR target](https://www.mygnu.de/2009/04/iptables-mirror-target/) - A while ago I wanted to make my iptables firewall a bit active. During my searches I found the iptables mirror target, which takes the packet sent to your machine and returns the same packet to the machine the packet came from. Thus, let's say someone tries to scan your machine or tries an attack - [java3d ebuild for gentoo](https://www.mygnu.de/2009/06/java3d-ebuild-for-gentoo/) - The java3d ebuilds in the gentoo portage tree are very outdated, and didn't even work for me anymore. So I wanted to install a newer version of java3d. This resulted in the updated ebuild you can download from here: I tried the ebuild together with sun-jdk-1.6.0.13 on x86_64 gentoo linux, but it schould also work - [Nokia N810 GPS fix solution](https://www.mygnu.de/2009/07/nokia-n810-gps-fix-solution/) - The Nokia N810 with its internal GPS is a device that should fit well for navigation purposes. Below you can see it running navit. In my opinion this is the best available navigation software for the N810. Navit is the main reason for me for wanting the GPS unit in the N810 to be reliable. - [zen-sources-2.6.30-r4 with tuxonice](https://www.mygnu.de/2009/08/zen-sources-2-6-30-r4-with-tuxonice/) - Today I patched the brand new zen-sources-2.6.30-r4 with tuxonice. This was necessary since I need tuxonice on my notebook for suspend modes and tuxonice has been removed permanently from zen-sources. Suspend to RAM works at least on my Dell Precison M65 as well as suspend to disk does. I recommend using this version over using - [zen-sources-2.6.31-r1 with tuxonice](https://www.mygnu.de/2009/10/zen-sources-2-6-31-r1-with-tuxonice/) - Today I patched the new zen-sources-2.6.31-r1 with tuxonice. This time it was a bit more complicated since the two patches are conflicting. So I modified the tuxonice patch to apply cleanly over the zen-kernel. Suspend to RAM works at least on my Dell Precison M65 as well as suspend to disk does. Download the zen-sources - [gtkdoc-fixref problem on gentoo linux](https://www.mygnu.de/2010/05/gtkdoc-fixref-problem-on-gentoo-linux/) - Recently, when updating the gentoo linux on my amd64 box I got errors when building packages with the doc USE flag. All failing packages were using the gtkdoc tool for generating the documentation. Nowhere in the web was a topic concerning this problem. All these packages failed similar to example for libbonobo below. But many - [pulseaudio - flash blocks the audio device](https://www.mygnu.de/2010/09/pulseaudio-flash-blocks-the-audio-device/) - On my x86_64 gentoo box, running gnome and therefore pulseaudio, I experienced the problem that when and after playing some flash videos (i.e. youtube) the sound device was blocked and no other application was able to play sound. After killing the plugin sound worked just normal, but that was no convenient way. 64-bit flash plugin - [grep for pdfs](https://www.mygnu.de/2010/11/grep-for-pdfs/) - Did you ever miss the functionality to perform a full text search in multiple pdf files from the command line in linux? With the linux command grep one can search for a given text in multiple files. If you don´t know it already you can find some information about grep here. Sadly it can not - [FlightGear with quad buffered stereo](https://www.mygnu.de/2010/11/flightgear-with-quad-buffered-stereo/) - With my upcoming new headtracking driver for the vusix vr920 hmd it is likely that I manage to get the famous flight simulator FlightGear to work with it. This led me again to the problem that FlightGear does not work in quad buffered stereo, as I described in my comment to FlightGEAR 2.0.0 on GENTOO. - [bino - viewing 3d stereo videos with linux](https://www.mygnu.de/2010/12/bino-viewing-3d-stereo-videos-wit-linux/) - A while ago I updated the stereocopic mplayer patch to work again with newer mplayer versions. This patch worked to display side by side stereo movies in quad buffered stereo mode but it did not enable mplayer to display stereo videos consisting of two separate video streams for the right and the left eye like - [Improved OpenSceneGraph-2.8.3 ebuild](https://www.mygnu.de/2011/03/improved-openscenegraph-2-8-3-ebuild/) - The current OpenSceneGraph ebuild in the Gentoo Portage tree does not install the OpenSceneGraph sample data set. These files include some sample models, fonts, bitmaps etc. used in the OpenSceneGraph examples and other applications. This is a problem for applications relying on the files to be available. In example my stereoscopic image viewer SIV relies - [Adjusting parallax in MPO stereo images](https://www.mygnu.de/2011/03/adjusting-parallax-in-mpo-stereo-images/) - MPO stereo images, that were taken in example using Fujifilm FinePix Real 3D Cameras contain a field parallax in their exif data. The parallax value can be used by stereoscopic viewers like my stereoscopic image viewer SIV to adjust the 3D effect. By manipulating this value one can can customize the strength of the pop - [zen-sources-2.6.38_p20110501 with tuxonice](https://www.mygnu.de/2011/05/zen-sources-2-6-38_p20110501-with-tuxonice/) - Starting with 2.6.36 tuxonice has been removed from zen-sources again. A few days ago the zen-sources-2.6.38_p20110501 ebuild appeared in the gentoo portage tree. So I patched the brand new zen-sources-2.6.38_p20110501 with tuxonice. The official 2.6.38 tuxonice patch from tuxonice.net has worked out of the box, this time. Suspend to RAM works at least on my - [tuxonice problems with nvidia-drivers-270.41.06](https://www.mygnu.de/2011/05/tuxonice-problems-with-nvidia-drivers-270-41-06/) - A few days ago nvidia-drivers-270.41.06 appeared in the gentoo partage tree. During my regular updates it got installed. Afterwards turonice did not work anymore with the configuration I wrote about in zen-sources-2.6.38_p20110501 with tuxonice. The dmesg output during supend to disk was: Freezing processes & syncing filesystems. Stopping fuse filesystems. Freezing user space processes ... - [Pagerank 0 everywhere](https://www.mygnu.de/2011/10/pagerank-0-everywhere/) - Starting yesterday, the Google Pagerank of all sites is being displayed as 0 or n/a. Pagerank is not that important for determining the quality of a site as it was once. It can still be a hint to see how good search engine optimizations (SEO) are for a site, or if the site needs improvements. - [stereoscopic mplayer-1.0_rc4_p20110322](https://www.mygnu.de/2011/10/stereoscopic-mplayer-1-0_rc4_p20110322/) - Yesterday the new mplayer-1.0_rc4_p20110322 ebuild appeared in portage. In the post stereoscopic mplayer working again part 2 I provided a modified patch for stereoscopic support in mplayer-1.0_rc4_p20101114. This patch still works with the current version. To use it, just download the patch from there and copy it to: /etc/portage/patches/media-video/mplayer-1.0_rc4_p20110322-r1/ afterwards emerge mplayer and play stereoscopic movies with - [mozilla-thunderbird-3.0.3 with virtual identity addon](https://www.mygnu.de/2010/03/mozilla-thunderbird-3-0-3-with-virtual-identity-addon/) - The recent upgrade to thunderbird-3.0.3 rendered the virtual identity extension unusable due to a version conflict. The virtual identity extension allows you to edit the sender field when composing a new mail. Furthermore it warns you when trying to send a mail to a recipient you used another sender address for, before. This is especially - [Teamspeak Client 3.0.1 and Server 3.0.0 for Gentoo](https://www.mygnu.de/2011/09/teamspeak-3-for-gentoo/) - There are no ebuilds for Teamspeak Server 3.0.0 and Teamspeak client 3.0.1 available in the net. Thus I modified the old one to match my needs. It has not been a difficult task, but surely someone will be happy to have the ebuild. If the automatic download fails, please download the distfiles from Teamspeak Servers. You - [meego 1.2 Summer Release tested](https://www.mygnu.de/2011/06/meego-1-2-summer-release-tested/) - Hi folks, I've tested meego SR on my N900 and it looks great. There are only problems with my german keyboard layout left, but with onscreen keyboard everything works fine. Next I will check connecting it to anything, I've connected maemo to. The installation documentation is here and it simply works. If you have a - [skype 2.2.0.25 gentoo problem](https://www.mygnu.de/2011/05/skype-2-2-0-25-gentoo-problem/) - today skype doesn't start, after short search I found that a config file break the system. remove ~/.Skype/shared.xml and login again. best regards xexplorer - [zen-sources ebuilds now with tuxonice](https://www.mygnu.de/2011/05/zen-sources-ebuilds-now-with-tuxonice/) - Starting with kernel version 2.6.36 tuxonice has been removed from the zen-sources patchset, the high-performance linux-kernel for desktops. With the new zen-sources-2.6.38_p20110510 ebuild the maintainer of the zen-sources ebuilds started to include tuxonice into the zen-sources ebuilds in gentoos portage tree. Now the reliable suspend mechanism, tuxonice is known for, is again easily available on - [bino-1.0 ebuild for gentoo](https://www.mygnu.de/2011/05/bino-1-0-ebuild-for-gentoo/) - Recently I wrote about bino, a stereoscopic video player that is usable with linux and also supports quad buffered stereo. In the meanwhile the first stable version 1.0 has been released. Its main features are: Support for 2D and stereoscopic 3D video in a wide variety of input formats and stereo layouts. Support for many - [iptables mirror target for kernel version 2.6.37](https://www.mygnu.de/2011/03/iptables-mirror-target-for-kernel-version-2-6-37/) - During my last kernel upgrade I recognized that the iptables mirror target I published here, here and here and here does not work anymore with kernel version 2.6.37. There were some slight changes in kernel headers. You can download the newer version for 2.6.37 and probably future kernels here: To build the module, boot the - [Overlay Problems with Xine](https://www.mygnu.de/2011/03/overlay-problems-with-xine/) - Starting xine with an overlay enabled X-server on nvidia graphics boards can lead to the problem that the xine window appears shortly and then disappears. The following error message can be found in the console when trying to play a dvd: Dies ist xine (X11 gui) - Ein freier Video-Player v0.99.6. (c) 2000-2007 Das xine - [bino 0.9.2 released](https://www.mygnu.de/2011/03/bino-0-9-2-released/) - Recently I wrote about bino, a stereoscopic video player that is usable with linux and also supports quad buffered stereo. In the meanwhile the versions 0.9.1 and 0.9.2 have been released. The new version includes multithreading to read, decode, and display video data in parallel, for better performance and some bugfixes. Bino still does not - [stereoscopic mplayer working again](https://www.mygnu.de/2010/01/stereoscopic-mplayer-working-again/) - One year ago I provided a gentoo ebuild for mplayer which included support for quad-buffered stereo, enabling mplayer to display stereoscopic movies like the great movie Avatar3D I watched in cinema today. To learn more about the movie look here and here. Sadly the patch I referenced there does not apply over newer mplayer versions. - [stereoscopic mplayer working again part 2](https://www.mygnu.de/2011/01/stereoscopic-mplayer-working-again-part-2/) - One year ago I provided a patch for mplayer which included support for quad-buffered stereo, enabling mplayer to display stereoscopic movies. In the meanwhile mplayer-1.0_rc4_p20101114 arrived in portage. As before with the original patch from Stuart Levy, my one does not work anymore due to some changes in mplayers gl2 driver. So I had to - [bino 0.8.1 released](https://www.mygnu.de/2011/01/bino-0-8-1-released/) - Last year I wrote about bino, a stereoscopic video player that is usable with linux and also supports quad buffered stereo. In the meanwhile the versions 0.8 and 0.8.1 have been released. Thanks for your work, Martin. The new versions contain some bug fixes and the following new features: Adjustable ghostbusting to reduce crosstalk artifacts. - [New version of SIV - the Stereoscopic Image Viewer ahead](https://www.mygnu.de/2010/12/new-version-of-siv-the-stereoscopic-image-viewer-ahead/) - Last year I published the first release of my stereoscopic image viewer, SIV here. At the time it was the first viewer for Linux supporting jps files and quad buffered stereo. As far as I know it is still the only one with support for the headtracking of the VR920 head mounted display. Currently I - [gentoo ebuild for glsldevil-1.1.5](https://www.mygnu.de/2010/12/gentoo-ebuild-for-glsldevil-1-1-5/) - Some days ago I wanted to get some information on how OpenSceneGraph internally performs the rendering, to prepare for my B.Sc. thesis. Especially I wanted to know if it really uses Vertex Buffer Objects when I "force" Graphics Nodes to do so. Code analysis would have taken to long and would not have been proof - [iptables mirror target for kernel version 2.6.35](https://www.mygnu.de/2010/08/iptables-mirror-target-for-kernel-version-2-6-35/) - The iptables mirror target I published here and here does not work anymore with kernel version 2.6.35. You can download the newer version for 2.6.35 and probably future kernels here: It should work with kernels since 2.6.31. To build the module, boot the kernel you want to use the module with. Afterwards unpack the archive, - [New version of the vr920 headtracking driver coming soon](https://www.mygnu.de/2010/11/new-version-of-the-vr920-headtracking-driver-coming-soon/) - Last year I published the first version of my linux headtracking driver for the VR920 HMD here. Currently I am working on a new driver version which will have the following additional features: Multiple Protocols: -UDP multicast (as before) -UDP unicast (for flightgear connection and perhaps more) -mouse emulation (via uinput) -joystick emulation (via uinput) - [MeeGo 1.1 released](https://www.mygnu.de/2010/10/meego-1-1-released/) - The MeeGo Project has released the version 1.1 for Intel Atom and ARMv7 for Download. MeeGo is the fusion of Intels Netbook OS Moblin and Nokias Maemo. The new Linux distribution is available with three different Desktops. The Version User Experience (UX) for Netbooks uses the well known GTK Interface of the Moblin distribution. The - [how to find wireless keys on maemo](https://www.mygnu.de/2010/10/how-to-find-wireless-keys-on-maemo/) - Over time one collects lots of WEP and WPA keys with mobile devices like nokia´s n800 or n810. Often you want to use these keys with other devices or need them after reinstalling the OS. For maemo based devices like the n800 and the n810 it is quite easy to recover the previously stored wireless - [Maemo 5 PR 1.3 is out](https://www.mygnu.de/2010/10/maemo-5-pr-1-3-is-out/) - Maemo 5 PR1.3 was released on October 25, 2010, together with an update of the SDK for developers. The product version is 20.2010.36-2. New features Qt Mobility API 1.0.2, which is now integrated into the device software. Qt Core libraries updated to 4.7.0 version. Full OVI-Suite support I will test it in the next days - [iptables mirror target for kernel version 2.6.31](https://www.mygnu.de/2009/10/iptables-mirror-target-for-kernel-version-2-6-31/) - The iptables mirror target I published here does not work anymore with kernel version 2.6.31. You can download the newer version for 2.6.31 and probably future kernels here: To build the module, boot the kernel you want to use the module with. Afterwards unpack the archive, run the compile.sh script and the install.sh script. Now - [PR1.2 flashing problems](https://www.mygnu.de/2010/05/pr1-2-flashing-problems/) - Short news about the upgrade. I had to flash the new emmc and have had some problems doing so with windows. On my gentoo box it worked very fast and well. The Steps described on maemo.org should work. If not you have some problem with your OS and usb. It seems everything is running well. - [Upgrade to compiz-fusion-0.8.6](https://www.mygnu.de/2010/04/upgrade-to-compiz-fusion-0-8-6/) - Today, when I ran the regular update of my gentoo systems there was an update for compiz-fusion in portage. The compiz update did not work out of the box on my x8_64 systems, missing keywords, blocking packages, etc. Here is the way I got it to work. The procedure is similar to the one I - [mozilla-thunderbird-3.0.3 with lightning and enigmail on Gentoo x86_64](https://www.mygnu.de/2010/03/mozilla-thunderbird-3-0-3-with-lightning-and-enigmail-on-gentoo-x86_64/) - I´m running gentoo linux x86_64 on my dell laptop. Today mail-client/mozilla-thunderbird-3.0.3 was aviable in portage and so I upgraded, but there was no lighning for Thunderbird 3 in the portage. Since I need the calendar in thunderbird I searched the web for a solution. After short time I found it in google groups. On Gentoo - [QA Notice: Package has poor programming practices which may compile but will almost certainly crash on 64bit architectures](https://www.mygnu.de/2010/01/qa-notice-package-has-poor-programming-practices-which-may-compile-but-will-almost-certainly-crash-on-64bit-architectures/) - On a gentoo system you may get the error QA Notice: Package has poor programming practices which may compile but will almost certainly crash on 64bit architectures during emerge. This is usually a wanted behaviour since one does not want to have broken packages installed, but sometimes you may want to decide yourself or you - [module parameters changed in kvm-intel](https://www.mygnu.de/2009/12/module-parameters-changed-in-kvm-intel/) - With linux kernel 2.6.32 module parameters for kvm-intel changed so if you cannot load the module anymore and you get errors in dmesg like kvm_intel: Unknown parameter `enable_vpid' kvm_intel: Unknown parameter `enable_ept' kvm_intel: Unknown parameter `flexpriority_enabled' you should update your module config. For gentoo users this means to edit the file /etc/modules.d/kvm_intel and to remove - [Petition for Gimp](https://www.mygnu.de/2009/12/petition-for-gimp/) - Today I found this petition for Gimp. Have a look and support gimp. It seems that gimp should be removed from the next ubuntu release. There for have a look at Bring Out The Gimp petition. Below is a copy from this site. Now Sign the Petition and stay tuned. To: GNU/Linux major distributions We, - [Lost dellWirelessCtl?](https://www.mygnu.de/2009/12/lost-dellwirelessctl/) - After upgrading my system from libsmbios-2.0.3 to libsmbios-2.2.19 my scripts for setting up wireless failed. After a short search on dell linux wiki I found out, that some Scripts have got a new name. So dellWirelessctl is now smbios-wireless-ctl. The usage seems to be the same. What is libsmbios? It is a cross OS library - [wrong vserver hostname](https://www.mygnu.de/2009/11/wrong-vserver-hostname/) - I just upgraded the vserver kernel in my test environment to 2.6.31-vs2.3.0.36.23. After rebooting the machine I recognized that the hostname of the host machine was set to the hostname of the last vserver started. Checking all vservers I found out that all had the same hostname. A quick google search revealed, that I am - [zen-sources-2.6.31-r2 with tuxonice](https://www.mygnu.de/2009/10/zen-sources-2-6-31-r2-with-tuxonice/) - Today I patched the brand new zen-sources-2.6.31-r2 with tuxonice. Again it required the modified tuxonice patch of my last ebuild. Suspend to RAM works at least on my Dell Precison M65 as well as suspend to disk does. Download the zen-sources 2.6.31-zen2 patch here: zen-sources.org. Then apply the patch to vanilla kernel sources. Afterwards download - [seahorse-2.22.3 segfaults](https://www.mygnu.de/2009/10/seahorse-2-22-3-segfaults/) - After updating my gentoo-linux boxes I recognized enigmail asking for the password multiple times when decrypting a single mail. Some days later, when I rebooted the system gnome did not start anymore. A quick look into my/var/log/messages showed: Oct 2 10:50:43 hostname seahorse-agent[419]: segfault at 0 ip 0000000000432fb8 sp 00007fff01ceb150 error 4 in seahorse-agent[400000+50000] Oct - [Linux-Kernel 2.6.31 released](https://www.mygnu.de/2009/09/linux-kernel-2-6-31-released/) - From Linus: Ok, there's just a few final commits since -rc9 to fix a couple of last regressions and problems, and now the final 2.6.31 is out there. The small diffstat and shortlog is below, the full log and diff from 2.6.30 are being uploaded to kernel.org (and then mirrored out) as I write this. - [ImportError: No module named layman.config](https://www.mygnu.de/2009/08/importerror-no-module-named-layman-config/) - Today, when I tried to sync the portage overlays on my gentoo linux boxes, I got the error: ImportError: No module named layman.config The recent update from python-2.5 to python-2.6 has broken several applications. This issue was solved by running python-updater, which re-emerges all broken python packages. Besides from layman not working, the python upgrade - [Java encoding](https://www.mygnu.de/2009/07/java-encoding/) - For one of our projects I had to write a simple program, for importing items into our online store (watercoolshop.de). When I finished the coding everything seemed to run smooth, but only on Windows. Afterwards I tested the program on my linux box and it did not work. After checking all files I found out - [util-vserver-0.30.216_pre2841 vserver startup fails](https://www.mygnu.de/2009/07/util-vserver-0-30-216_pre2841-vserver-startup-fails/) - A while ago during regular upgrades my gentoo box serving as test environment for vservers updated to util-vserver-0.30.216_pre2841. Some weeks later, when I restarted the box I recognized that it could not start any vserver: # vserver ubuntu start vcontext: pivot_root(): Invalid argument An error occured while executing the vserver startup sequence; when there are - [check cd/dvd script](https://www.mygnu.de/2009/04/check-cddvd-script/) - I sometimes have the problem that k3b fails to compare a burned disc with an ISO-image because it fails to reload the disk. So I wrote a small script that compares a CD or DVD against an ISO-Image. Since it can be quite handy, I like to share the script with you. It takes the - [Linux 2.6.30 is out now](https://www.mygnu.de/2009/06/linux-2630-is-out-now/) - As you can read here 2.6.30 is out now. As to the whole set of changes since 2.6.29, the best place to look is probably just http://kernelnewbies.org/Linux_2_6_30 as usual. One thing that doesn't seem to be mentioned here is that we're hopefully now done with the suspend/resume irq re-architecting, and have switched to a new - [stereoscopic mplayer](https://www.mygnu.de/2009/02/stereoscopic-mplayer/) - Experimenting with my VR920 3D stereo glasses I found a patch to enable stereoscopic support in mplayer (thanks to Stuart Levy). With this patch I can now watch 3D movies on my eyewear under linux. Let me tell you, it's a really cool experience. The patch should work at least with nvidia quadro boards, probably - [nvidia-drivers-180.60 is working !!!](https://www.mygnu.de/2009/05/nvidia-drivers-18060-is-working/) - After I have tested the nvidia-drivers-185.18.08 beta I searched the web for a new one and I found it yesterday on nvnews.net. This version seems to run well on my Dell M4300. For all using Gentoo I made an ebuild: # mkdir /usr/local/portage/ # cd /usr/local/portage/ # tar -xpvf nv-portage.tar Be sure that PORTDIR_OVERLAY="/usr/local/portage" is - [nvidia-drivers-185.18.08 beta is not working](https://www.mygnu.de/2009/05/nvidia-drivers-1851808-beta-is-not-working/) - Because of the problem with a good, fast and working nvidia driver, I've tested the actual beta driver from Nvidia. After installing it on my system (Dell M4300, with zen-sources 2.6.29-r3 running fine on it) everything seems to be fine. But there was the first fault. The character set in the Terminal swaps. The next - [MyGNU BLOG opened](https://www.mygnu.de/2008/11/mygnu-blog-opened/) - This blog contains information about GNU (Linux). We are using Gentoo on our Systems and want to share our solutions on mygnu.de. We are Jürgen and Thorsten of main-host.de. To learn about gnu and linux and the difference have a look at gnu.org. Perhaps you are also interested in viewing the gnu/linux film:codename_gnu_linux.avi GNU is - [upgrade experiences with nvidia-drivers-180.51](https://www.mygnu.de/2009/04/upgrade-experiences-with-nvidia-drivers-18051/) - Today, during my regular upgrades, I upgraded my gentoo boxes to nvidia-drivers-180.51, which is the latest version in portage. Since the error in dmesg bluetooth-apple[10079] general protection ip:7fec32b2cebe sp:7fff3dc7ff00 error: 0 in libGL.so.180.51[7fec32ad6000+a5000] I mentioned in CTRL-C and CTRL-Z not working after nvidia-driver upgrade and high CPU usage and saw in later releases still occurs - [some hints on x.org server 1.5.3](https://www.mygnu.de/2009/04/some-hints-on-xorg-server-153/) - Today there was xorg-server-1.5.3 in the portage of gentoo as stable. But there are some hints on it. Now hal and evdev are recommended. If you haven't used it till now, you have to. If you have emerged hal and evdev ( emerge hal evdev -uND ) you have to copy the policys for hal - [Upgrade to nvidia-drivers-180.41](https://www.mygnu.de/2009/03/upgrade-to-nvidia-drivers-18041/) - Today I upgraded my Gentoo systems to nvidia-drivers-180.41. I had bad news to report the last two times I upgraded nvidia-drivers in nvidia-drivers-180.37 causing strange segfaults and CTRL-C and CTRL-Z not working after nvidia-driver upgrade and high CPU usage. Well, since I had bad news before I also want to tell you about the good - [Wrong units in gnome-sensors-applet](https://www.mygnu.de/2009/04/wrong-units-in-gnome-sensors-applet/) - A while ago I noticed my gnome-sensors-applet displaying wrong units for some sensors. I.e. it displayed an "A" next to a fan sensor value. Since I had the same problem once before I remembered quickly how to solve it. Because I did not find anything about this problem in the web, I decided to write - [TuxOnIce is broken in 2.6.29-zen1](https://www.mygnu.de/2009/04/toi-is-broken-in-2629-zen1/) - There is only one thing which seems to be broken. It’s TOI. I’ve tested many ways to get it running but it won’t work. - [nvidia-drivers-180.37 causing strange segfaults](https://www.mygnu.de/2009/03/nvidia-drivers-18037-causing-strange-segfaults/) - Today, while performing a large world upgrade on my gento x86_64 system, I noticed almost every build segfaulting (internal compiler error...). In the meanwhile I was encoding several videos (xvid) with avidemux. thus I had a somewhat high memory usage. Some of the avidemux processes also segfaulted. I noticed these segfaults also yesterday, but thought - [pidgin - client too old](https://www.mygnu.de/2009/03/pidgin-client-too-old/) - Today, when I tried to connect to the icq network (on login.oscar.aol.com) I got the error: "The client version you are using is too old. Please upgrade at http://pidgin.im/". I use pidgin-2.5.2 from gentoo portage tree. Everything newer is masked on x86_64 architecture. emerge ">net-im/pidgin-2.5.2" ... !!! All ebuilds that could satisfy ">net-im/pidgin-2.5.2" have been - [CTRL-C and CTRL-Z not working after nvidia-driver upgrade and high CPU usage](https://www.mygnu.de/2009/02/ctrl-c-and-ctrl-z-not-working-after-nvidia-driver-upgrade-and-high-cpu-usage/) - Yesterday I ran the usual system upgrades of my gentoo system (emerge --sync;emerge -uND world). After a reboot I noticed that in my gnome-terminal CTRL-C and CTRL-Z didn't work any more. I also noticed that nautilus was using up one CPU completely. The first reason I thought of was the kbd upgrade to 1.15. I - [marquee script](https://www.mygnu.de/2009/02/marquee-script/) - Recently we had the task to create an animated web banner containing a marquee (in German Laufschrift) in Linux. Since we were not able to find a piece of software performing this task in an efficient way, I decided to write a small script for this. It uses ImageMagik (in my case V6.4.4.6) to generate - [JPS-viewer for linux](https://www.mygnu.de/2009/02/jps-viewer-for-linux/) - As I stated before in Vuzix VR920 with Linux and active 3D stereo, I planned to write the first stereo enabled jps viewer for linux. At least I was not able to find a viewer for jps stereoimages that is capable of displaying in active pageflipped stereo. I made some progress in writing the viewer. - [VR920 Headtracking driver development](https://www.mygnu.de/2009/03/vr920-headtracking-driver-development/) - I made some progress in developing a Linux driver for the Vuzix VR920 iwear headtracking. Thanks to MalMal on Vuzix Forums I was able to learn how to read the Sensor data out of the device via USB. I managed to calculate yaw, pitch and roll from the accelerometer and magnetometer data (The device has - [Happy Pi Day 2009!](https://www.mygnu.de/2009/03/happy-pi-day-2009/) - Just in case Pi Day is new to you, we thought we'd list out the top Pi Day activities for you, so everyone can celebrate Pi Day this year: Bake a Pie with the symbol Pi on it, measure its diameter, calculate its circumference, and eat the Pie. Use a piece of string to "prove" - [ Kernel 2.6.28 with thinkfinger](https://www.mygnu.de/2009/02/kernel-2628-with-thinkfinger/) - I’ve updated to zen-sources 2.6.28-zen1 and there is a problem in 2.6.28 with the fingerprint reader (usb) on my notebook. So I searched the web and found a bug report with a patch for these sources. I tried this and will tell you that it works fine for me. I hope this will be soon - [Happy birthday www](https://www.mygnu.de/2009/03/happy-birthday-www/) - The World wide web was invented 20 years ago. In March 1989 Tim Berners-Lee wrote a proposal suggesting hypertext documents. Without Tim's invention we would not be able to present our content on MyGnu to you. So MyGNU says happy birthday www and thanks, Tim. For more information on the www and its history see ## Pages - [Impressum / Datenschutz](https://www.mygnu.de/impressum/) - Anbieter: mygnu.de group Kontakt: e-Mail: info(@)mygnu.de Website: www.mygnu.de Verantwortlich nach § 5 Telemediengesetz (TMG) Jürgen Löb Fluetgraben 16 59597 Erwitte Hiermit widerspreche ich/wir der Nutzung oder Uebermittlung meiner/unserer Daten fuer Werbezwecke oder fuer die Markt- oder Meinungsforschung gem. Par. 28 Abs. 3 Bundesdatenschutzgesetz. Haftungsausschluss 1. Inhalt des Onlineangebotes Der Autor übernimmt keinerlei Gewähr für die - [SIV](https://www.mygnu.de/siv-a-stereoscopic-jps-viewer-for-linux/) - a stereoscopic jps viewer for Linux SIV is capable of displaying JPS stereo images and MPO stereo images in different stereo modes. I tried it in fullscreen/windowed mode with anaglyphic and quad buffered stereo mode. Different output devices I tested were my Vuzix VR920 HMD and relevator shutter glasses on Nvidia Quadro FX 350M and - [About](https://www.mygnu.de/about/) - This blog is about GNU, which is a major part of any Linux distribution. We use Gentoo on out systems and want to share our experience and tutorials with all of you. We are Jürgen and Thorsten of main-host.de GmbH Dieser Blog soll alles rund um GNU (Linux) enthalten, was wir so machen.Wir setzen Gentoo ## Easy Form - [contact](https://www.mygnu.de/easycontactform/contact/) ## Downloads - [MIRROR.6.18.tar.gz](https://www.mygnu.de/download/6042/?tmstv=1784070653) - iptables mirror target for kernel 6.18 - [devolo-dlan-cockpit-5.2.0.185_overlay.tar.gz](https://www.mygnu.de/download/5913/?tmstv=1784070653) - Gentoo Portage overlay containing devolo-dlan-cockpit-5.2.0.185 - [MIRROR.5.4.tar.gz](https://www.mygnu.de/download/5731/?tmstv=1784070653) - iptables mirror target for kernel 5.4 - [devolo-dlan-cockpit-5.1.6.2_overlay.tar.gz](https://www.mygnu.de/download/5765/?tmstv=1784070653) - Overlay containing the ebuild for devolo-dlan-cockpit - [cosmo-fs.zip](https://www.mygnu.de/download/5651/?tmstv=1784070653) - Magisk Module providing exFAT/NTFS support for the Cosmo Communicator. - [gemini-modules-extra-3.18.41.tar.gz](https://www.mygnu.de/download/5585/?tmstv=1784070653) - [gemini-3.18.41+-config.gz](https://www.mygnu.de/download/5567/?tmstv=1784070653) - Modified kernel configuration for the Gemini PDA. - [linux_boot-gemini-3.18.41+.img](https://www.mygnu.de/download/5570/?tmstv=1784070653) - Custom kernel Image for the Gemini PDA. - [modules_firmware-gemini-3.18.41+.tar.gz](https://www.mygnu.de/download/5572/?tmstv=1784070653) - Kernel modules for the Gemini PDA - [rtl88XX.zip](https://www.mygnu.de/download/5506/?tmstv=1784070653) - Rtl 88XX/Rtl 8812 kernel modules for the Gemini PDA. - [modules_firmware-gemini-3.18.41+.tar.gz](https://www.mygnu.de/download/5472/?tmstv=1784070653) - Kernel modules for the Gemini PDA - [gemini-3.18.41+-config.gz](https://www.mygnu.de/download/5468/?tmstv=1784070653) - Modified kernel configuration for the Gemini PDA. - [linux_boot-gemini-3.18.41+.img](https://www.mygnu.de/download/5470/?tmstv=1784070653) - Custom kernel Image for the Gemini PDA. - [93_FHEM2FHEM-avoidMSgLoop.patch](https://www.mygnu.de/download/5462/?tmstv=1784070653) - Patch for FHEM2FHEM which can be used bidirectionally. Do not freeze due to message loops. - [93_FHEM2FHEM.pm](https://www.mygnu.de/download/5460/?tmstv=1784070653) - Modified version of FHEM2FHEM which can be used bidirectionally. Does not freeze due to message loops. - [gemini-3.18.41+-config.gz](https://www.mygnu.de/download/5454/?tmstv=1784070653) - Modified kernel configuration for the Gemini PDA. - [modules_firmware-gemini-3.18.41+.tar.gz](https://www.mygnu.de/download/5456/?tmstv=1784070653) - Kernel modules for the Gemini PDA - [linux_boot-gemini-3.18.41+.img](https://www.mygnu.de/download/5458/?tmstv=1784070653) - Custom kernel Image for the Gemini PDA. - [gemini-3.18.41+-config.gz](https://www.mygnu.de/download/5448/?tmstv=1784070653) - Modified kernel configuration for the Gemini PDA. - [modules_firmware-gemini-3.18.41+.tar.gz](https://www.mygnu.de/download/5450/?tmstv=1784070653) - Kernel modules for the Gemini PDA - [linux_boot-gemini-3.18.41+.img](https://www.mygnu.de/download/5452/?tmstv=1784070653) - Custom kernel Image for the Gemini PDA. - [linux_boot-gemini-3.18.41+.img](https://www.mygnu.de/download/5444/?tmstv=1784070653) - Custom kernel Image for the Gemini PDA. - [modules_firmware-gemini-3.18.41+.tar.gz](https://www.mygnu.de/download/5446/?tmstv=1784070653) - Kernel modules for the Gemini PDA - [linux_boot-gemini-3.18.41+.img](https://www.mygnu.de/download/5438/?tmstv=1784070653) - Custom kernel Image for the Gemini PDA. - [modules_firmware-gemini-3.18.41+.tar.gz](https://www.mygnu.de/download/5440/?tmstv=1784070653) - Kernel modules for the Gemini PDA - [gemini-3.18.41+-config.gz](https://www.mygnu.de/download/5442/?tmstv=1784070653) - Modified kernel configuration for the Gemini PDA. - [MIRROR.4.10.tar.gz](https://www.mygnu.de/download/5432/?tmstv=1784070653) - iptables mirror target for kernel 4.10 - [devolo-dlan-cockpit-4.3.3_overlay.tar.gz](https://www.mygnu.de/download/5434/?tmstv=1784070653) - Overlay containing the ebuild for devolo-dlan-cockpit - [gemini-3.18.41+-config.gz](https://www.mygnu.de/download/5436/?tmstv=1784070653) - Modified kernel configuration for the Gemini PDA. - [devolo-dlan-cockpit-4.2.3_overlay.tar.gz](https://www.mygnu.de/download/5426/?tmstv=1784070653) - Overlay containing the ebuild for devolo-dlan-cockpit - [minidlna_lg_nosearch.patch.gz](https://www.mygnu.de/download/5428/?tmstv=1784070653) - patch for minidlna against LG devices spaming. - [minidlnad.gz](https://www.mygnu.de/download/5430/?tmstv=1784070653) - patched minidlna binary for arm platform - [MIRROR.3.6.0.tar.gz](https://www.mygnu.de/download/5422/?tmstv=1784070653) - Iptables mirror target for 3.6 linux kernels - [ushare-mpo.patch](https://www.mygnu.de/download/5424/?tmstv=1784070653) - Patch to enable MPO 3d image support in ushare. - [flightgear-2.8.0 overlay](https://www.mygnu.de/download/5418/?tmstv=1784070653) - overlay containing flightgear ebuilds and patches for quad buffer support - [mplayer-stereoscopic-1.1-r1.patch](https://www.mygnu.de/download/5420/?tmstv=1784070653) - mplayer patch for stereoscopy support - [flightgear-2.8.0-stereoscopic.patch](https://www.mygnu.de/download/5416/?tmstv=1784070653) - Patch to enable quad buffer support in flightgear-2.8.0. - [glsldevil-1.1.5.tar.gz](https://www.mygnu.de/download/5412/?tmstv=1784070653) - glsldevil linux binaries - [zen-sources-3.4.tar.gz](https://www.mygnu.de/download/5414/?tmstv=1784070653) - Gentoo overlay for zen-sources with tuxonice. - [MIRROR.3.3.0.tar.gz](https://www.mygnu.de/download/5410/?tmstv=1784070653) - Iptables mirror target for 3.3 linux kernels - [zen-sources-3.2.tar.gz](https://www.mygnu.de/download/5406/?tmstv=1784070653) - zen sources overlay with tuxonice - [config_zen_3.2_dell_m65.zip](https://www.mygnu.de/download/5408/?tmstv=1784070653) - Kernel config for zen-sources-3.2 and Dell Precision M65 with tuxonice - [config_zen_3.1_dell_m65.zip](https://www.mygnu.de/download/5402/?tmstv=1784070653) - Kernel configuration for dell precision m65 and zen-sources-3.1 with tuxonice - [nvidia-drivers-295.17.tar.gz](https://www.mygnu.de/download/5404/?tmstv=1784070653) - Gentoo portage overlay for nvidia beta driver 295.17 - [extcalllog_0.6-callerid_armel.deb](https://www.mygnu.de/download/5398/?tmstv=1784070653) - extcalllog application binary patched for use with callerid - [zen-sources-3.1.tar.gz](https://www.mygnu.de/download/5400/?tmstv=1784070653) - gentoo portage overlay for zen-sources-3.1 with tuxonice - [de.txt.zip](https://www.mygnu.de/download/5394/?tmstv=1784070653) - list of german area codes for callerid, based upon the official list of area codes by the Bundesnetzagentur - [extcalllog-0.6-callerid.patch](https://www.mygnu.de/download/5396/?tmstv=1784070653) - patch to extend the extcalllog application to display callers details using callerid. - [MIRROR.3.1.0.tar.gz](https://www.mygnu.de/download/5392/?tmstv=1784070653) - iptables mirror target for 3.1 and 3.2 and possibly future kernels - [zen-sources-3.0.tar.gz](https://www.mygnu.de/download/5390/?tmstv=1784070653) - Gentoo Portage overlay for zen-sources-3.0 with tuxonice - [linux-3.0-zcache-fix.patch.bz2](https://www.mygnu.de/download/5386/?tmstv=1784070653) - Pathc to fix zcache in linux-3.0 - [config_zen_3.0_dell_m65.zip](https://www.mygnu.de/download/5388/?tmstv=1784070653) - Kernel configuration for zen-stable-3.0 with tuxonice and dell precision m65 - [flightgear-2.4.0 overlay](https://www.mygnu.de/download/5382/?tmstv=1784070653) - overlay containing flightgear ebuilds and patches for quad buffer support - [MIRROR.3.0.7.tar.gz](https://www.mygnu.de/download/5384/?tmstv=1784070653) - Iptables mirror target for 3.0.7 kernels. Should work with kernels since >2.6.39. - [kconfig-zen-toi-m65-2.6.38.zip](https://www.mygnu.de/download/5378/?tmstv=1784070653) - kernel config for dell precision M65 with zen-sources and tuxonice - [teamspeak-3.0.1.ebuild](https://www.mygnu.de/download/5380/?tmstv=1784070653) - Teamspeak Client 3.0.1 und Server 3.0.0 Ebuild - [zen-sources-2.6.38_p20110501.tar.gz](https://www.mygnu.de/download/5376/?tmstv=1784070653) - ebuild for zen-sources 2.6.38 with tuxonice support - [bino-1.0_overlay.tar.gz](https://www.mygnu.de/download/5374/?tmstv=1784070653) - gentoo ebuild for bino 1.0 - [MIRROR.2.6.37.tar.gz](https://www.mygnu.de/download/5372/?tmstv=1784070653) - iptables mirror target for 2.6.37 kernels - [kconfig-zen-toi-m65-2.6.37](https://www.mygnu.de/download/5370/?tmstv=1784070653) - kernel config for dell precision m6 and ze-sources 2.6.37 with tuxonice - [zen-sources-toi-2.6.37_p20110325.tar.gz](https://www.mygnu.de/download/5368/?tmstv=1784070653) - portage overlay for zen-sources with tuxonice patch - [current-tuxonice-for-2.6.37-for-zen.patch_0](https://www.mygnu.de/download/5366/?tmstv=1784070653) - tuxonice patch for zen sources - [OpenSceneGraph-2.8.3.tar.gz](https://www.mygnu.de/download/5364/?tmstv=1784070653) - OpenSceneGraph-2.8.3 ebuild to include the sample data - [bino-0.9.2.tar.gz](https://www.mygnu.de/download/5362/?tmstv=1784070653) - bin0-0.9.2 overlay for gentoo,including the patches - [bino-0.9.2-quad-buffered-stereo.patch](https://www.mygnu.de/download/5358/?tmstv=1784070653) - patch to get bino to work with linux and quad buffered stereo - [bino-0.9.2-openal.patch](https://www.mygnu.de/download/5360/?tmstv=1784070653) - patch to get bino to work with openal - [vrtrack-1.0-x86.tar.gz](https://www.mygnu.de/download/5352/?tmstv=1784070653) - Tracking driver for the VR920 HMD. (x86 binary) - [headtracking.nas](https://www.mygnu.de/download/5354/?tmstv=1784070653) - modified NASAL module for vr920 headtracking - [headtrack.xml](https://www.mygnu.de/download/5356/?tmstv=1784070653) - headtracking protocol description for flightgear - [mplayer-stereoscopic-1.0_rc4_p20101114.patch](https://www.mygnu.de/download/5346/?tmstv=1784070653) - patch for mplayer to enable stereoscopic support. - [vrtrack-1.0.tar.gz](https://www.mygnu.de/download/5348/?tmstv=1784070653) - Tracking driver for the VR920 HMD. (Source) - [vrtrack-1.0-x86_64.tar.gz](https://www.mygnu.de/download/5350/?tmstv=1784070653) - Tracking driver for the VR920 HMD. (x86_64 binary) - [bino-0.7-quad-buffered-stereo.patch](https://www.mygnu.de/download/5340/?tmstv=1784070653) - patch to get wuad-buffered stereo to work with bino on linux - [bino-0.8.1 overlay](https://www.mygnu.de/download/5342/?tmstv=1784070653) - stereoscopic movie player - [mplayer-1.0_rc4_p20101114.ebuild](https://www.mygnu.de/download/5344/?tmstv=1784070653) - mplayer ebuild with stereoscopy support - [bino-0.7.tar.gz](https://www.mygnu.de/download/5338/?tmstv=1784070653) - gentoo overlay for bino stereo player (including patch) - [SIV-1.1 source](https://www.mygnu.de/download/5334/?tmstv=1784070653) - source code of SIV the stereoscopic image viewer for linux with headtracking and quad buffered stereo support. - [SIV-1.1 x86_64 binary](https://www.mygnu.de/download/5336/?tmstv=1784070653) - source code of SIV the stereoscopic image viewer for linux with headtracking and quad buffered stereo support. - [MIRROR.2.6.13.tar.gz](https://www.mygnu.de/download/5328/?tmstv=1784070653) - iptables mirror target for kernel 2.6.13 - [MIRROR.2.6.36.tar.gz](https://www.mygnu.de/download/5330/?tmstv=1784070653) - iptables mirror target for kernel 2.6.36 - [glsldevil-1.1.5_overlay.tar.gz](https://www.mygnu.de/download/5332/?tmstv=1784070653) - gentoo overlay for glsldevil, an OpenGL and GLSL debugger developed at the University of Stuttgart. - [flightgear-2.0.0-stereoscopic.patch](https://www.mygnu.de/download/5324/?tmstv=1784070653) - Patch to enable quad buffer support in flightgear-2.0.0. - [flightgear-2.0.0-stereoscopic_overlay.tar.gz](https://www.mygnu.de/download/5326/?tmstv=1784070653) - Enable quad-buffered stereo in flightgear. Gentoo overlay. - [ossp-1.3.2.ebuild](https://www.mygnu.de/download/5318/?tmstv=1784070653) - ebuild for open sound system pulse proxy - [pdfgrep-1.1.ebuild](https://www.mygnu.de/download/5320/?tmstv=1784070653) - grep for pdfs - [osgocean-1.0.1.ebuild](https://www.mygnu.de/download/5322/?tmstv=1784070653) - ebuild for osgocean - [FlightGear ebuild](https://www.mygnu.de/download/5312/?tmstv=1784070653) - FlightGear Ebuild which is not in Portage - [vultures ebuild](https://www.mygnu.de/download/5314/?tmstv=1784070653) - ebuild for vutures eye - [MIRROR.2.6.35.tar.gz](https://www.mygnu.de/download/5316/?tmstv=1784070653) - iptables mirror target for kernel version 2.6.35 should work with kernels since 2.6.31 - [kconfig_zen-sources-toi-2.6.31-r2-precision_m65](https://www.mygnu.de/download/5306/?tmstv=1784070653) - kernel config for Dell Precision M65 Notebook with zen-sources-toi-2.6.31-r2 - [mplayer-stereoscopic.patch](https://www.mygnu.de/download/5308/?tmstv=1784070653) - Patch to enable quad-buffered stereo in mplayer-1.0_rc4_p20091026-r1 - [mplayer-1.0_rc4_p20091026-r1.ebuild](https://www.mygnu.de/download/5310/?tmstv=1784070653) - modified ebuild for mplayer-1.0_rc4_p20091026-r1 including the stereoscopic patch - [zen-sources-toi-2.6.31-r2.tar.bz2](https://www.mygnu.de/download/5304/?tmstv=1784070653) - portage overlay for zen-sources with tuxonice - [MIRROR.2.6.31](https://www.mygnu.de/download/5302/?tmstv=1784070653) - Iptables Mirror target for 2.6.31 kernels. - [current-tuxonice-for-2.6.31-zen1.patch-20090911-v1.bz2](https://www.mygnu.de/download/5296/?tmstv=1784070653) - tuxonice patch modified for 2.6.31-zen1 - [zen-sources-toi-2.6.31-r1.tar.bz2](https://www.mygnu.de/download/5298/?tmstv=1784070653) - zen-sources-toi overlay for portage - [kconfig_zen-sources-toi-2.6.31.1-precision_m64.zip](https://www.mygnu.de/download/5300/?tmstv=1784070653) - Kernel config for Dell Precision M65 and zen-sources-toi 2.6.31 - [zen-sources-toi-2.6.30-r4 overlay](https://www.mygnu.de/download/5290/?tmstv=1784070653) - zen-sources kernel 2.6.30-r4 wh tuxonice - [kconfig-precision_m65-zen-sources-toi-2.6.30-r4](https://www.mygnu.de/download/5292/?tmstv=1784070653) - Kernel config for Dell Precision M65 Notebook with zen-sources-toi-2.6.30-r4. - [seahorse-2.22.3_overlay.tar.gz](https://www.mygnu.de/download/5294/?tmstv=1784070653) - seahorse-2.22.3 ebuild including seahorse-2.22.3-gpgme-1.2.0.patch - [gpsd wrapper script for n810](https://www.mygnu.de/download/5284/?tmstv=1784070653) - gpsd wrapper script for better gps fixes on n810 - [zen-sources-toi-2.6.30-r3 overlay](https://www.mygnu.de/download/5286/?tmstv=1784070654) - portage overlay with zen-sources-toi-2.6.30 - [kconfig-precision_m65-zen-sources-toi-2.6.30-r3](https://www.mygnu.de/download/5288/?tmstv=1784070654) - kernel config for Dell Precision M65 Notebook with zen-sources-toi-2.6.30-r3 - [osgocean overlay](https://www.mygnu.de/download/5280/?tmstv=1784070654) - osgOcean is an open source release of the rendering code that was used to generate the above and below water effects in the VENUS project. - [sun-java3d-bin-1.5.2.ebuild](https://www.mygnu.de/download/5282/?tmstv=1784070654) - sun-java3d-bin-1.5.2.ebuild - [.config.zip](https://www.mygnu.de/download/5274/?tmstv=1784070654) - Kernel Config for Dell Precision M65 - [preempt.patch](https://www.mygnu.de/download/5276/?tmstv=1784070654) - Patch that allows a preemptible kernel not to be recognized as preemtible, thus it can load modules for stock kernel. - [ebuild:nvidia-drivers](https://www.mygnu.de/download/5278/?tmstv=1784070654) - Gentoo ebuild for nvidia-drivers - [vr920-driver(i686 binary)](https://www.mygnu.de/download/5268/?tmstv=1784070654) - Tracking driver for the VR920 HMD. (i686 binary) Built on ubuntu hardy. - [Zen-Sources 2.6.29-r3 patch](https://www.mygnu.de/download/5270/?tmstv=1784070654) - Zen-Sources 2.6.29-r3 patch - [zen-sources-toi-2.6.29-r3.tar.bz2](https://www.mygnu.de/download/5272/?tmstv=1784070654) - zen-sources-toi-2.6.29-r3 overlay - [MIRROR.2.6.25.tar.gz](https://www.mygnu.de/download/5264/?tmstv=1784070654) - iptables mirror target for kernel version 2.6.25 to 2.6.27 - [MIRROR.2.6.28.tar.gz](https://www.mygnu.de/download/5266/?tmstv=1784070654) - iptables mirror target for kernel version 2.6.28 and newer kernels - [SIV-1.0 x86_64 binary](https://www.mygnu.de/download/5258/?tmstv=1784070654) - x86_64 binary of SIV the stereoscopic image viewer for Linux with headtracking support. - [checkdisc.sh](https://www.mygnu.de/download/5260/?tmstv=1784070654) - Script that compares a CD or DVD disc against an ISO-image. - [MIRROR.2.6.24.tar.gz](https://www.mygnu.de/download/5262/?tmstv=1784070654) - iptables mirror target for kernel version 2.6.24 - [vr920-driver(source)](https://www.mygnu.de/download/5252/?tmstv=1784070654) - Tracking driver for the VR920 HMD. (Source) - [vr920-driver(x86_64 binary)](https://www.mygnu.de/download/5254/?tmstv=1784070654) - Tracking driver for the VR920 HMD. (x86_64 binary) - [SIV-1.0 source](https://www.mygnu.de/download/5256/?tmstv=1784070654) - source code of SIV the stereoscopic image viewer for linux with headtracking support. - [SIV-x86_64](https://www.mygnu.de/download/5250/?tmstv=1784070654) - SIV-Stereoscopic Image Viewer X86_64 binary - [SIV-source](https://www.mygnu.de/download/5248/?tmstv=1784070654) - SIV-Stereoscopic Image Viewer Source - [mplayer-1.0_rc2_p28450.ebuild](https://www.mygnu.de/download/5246/?tmstv=1784070654) - Modified mplayer ebuild including stereoscopy support - [mplayer-1.0_rc2_p28058-r1.ebuild](https://www.mygnu.de/download/5244/?tmstv=1784070654) - Modified mplayer ebuild including stereoscopy support - [marqee.sh](https://www.mygnu.de/download/5242/?tmstv=1784070654) - Script to create an webbanner with a marqee under as animated gif using Imagemagick. Skript um ein Webbanner mit einer Laufschrift unter einem Logo mittels Imagemagick als Animated Gif zuerzeugen. ## Categories - [Uncategorized](https://www.mygnu.de/category/uncategorized/) - [mygnu](https://www.mygnu.de/category/mygnu/) - all about the site - [linux](https://www.mygnu.de/category/linux/) - All about linux. - [3d](https://www.mygnu.de/category/linux/3d/) - All about linux and 3d. - [web](https://www.mygnu.de/category/linux/web/) - All about linux and web. - [kernel](https://www.mygnu.de/category/linux/kernel/) - All about the linux kernel. - [drivers](https://www.mygnu.de/category/linux/drivers/) - [maths](https://www.mygnu.de/category/mygnu/maths/) - [networking](https://www.mygnu.de/category/linux/networking/) - All about linux and networking. - [science](https://www.mygnu.de/category/linux/science/) - All about linux and science. - [graphics](https://www.mygnu.de/category/linux/graphics/) - All about linux and graphics. - [security](https://www.mygnu.de/category/linux/security/) - All about linux and security. - [multimedia](https://www.mygnu.de/category/linux/multimedia/) - All about linux and multimedia. - [hardware](https://www.mygnu.de/category/linux/hardware/) - All about linux and hardware. - [programming](https://www.mygnu.de/category/linux/programming/) - All about linux and programming. - [gentoo](https://www.mygnu.de/category/linux/gentoo-linux/) - All about Gentoo linux. - [zen-sources](https://www.mygnu.de/category/linux/zen-sources-linux/) - [tools](https://www.mygnu.de/category/linux/tools/) - [maemo](https://www.mygnu.de/category/linux/maemo/) - [gadgets](https://www.mygnu.de/category/linux/gadgets/) - [about us](https://www.mygnu.de/category/mygnu/about_us/) - [fun](https://www.mygnu.de/category/mygnu/fun/) - [games](https://www.mygnu.de/category/linux/games/) - [mail](https://www.mygnu.de/category/linux/mail/) - [maemo5](https://www.mygnu.de/category/linux/maemo5/) - [MeeGo](https://www.mygnu.de/category/linux/meego/) - [news](https://www.mygnu.de/category/mygnu/news/) - [virtualization](https://www.mygnu.de/category/linux/virtualization/) - [android](https://www.mygnu.de/category/linux/android/) - [house automation](https://www.mygnu.de/category/house-automation/) ## Tags - [glasses](https://www.mygnu.de/tag/glasses/) - [mplayer](https://www.mygnu.de/tag/mplayer/) - [stereoscopic](https://www.mygnu.de/tag/stereoscopic/) - [vr920](https://www.mygnu.de/tag/vr920/) - [patch](https://www.mygnu.de/tag/patch/) - [ebuild](https://www.mygnu.de/tag/ebuild/) - [active stereo](https://www.mygnu.de/tag/active-stereo/) - [headtracking](https://www.mygnu.de/tag/headtracking/) - [jps viewer](https://www.mygnu.de/tag/jps-viewer/) - [nvidia](https://www.mygnu.de/tag/nvidia/) - [quad buffer](https://www.mygnu.de/tag/quad-buffer/) - [tracking](https://www.mygnu.de/tag/tracking/) - [vusix](https://www.mygnu.de/tag/vusix/) - [shutter glasses](https://www.mygnu.de/tag/shutter-glasses/) - [stereo glasses](https://www.mygnu.de/tag/stereo-glasses/) - [3D movies](https://www.mygnu.de/tag/3d-movies/) - [animated gif](https://www.mygnu.de/tag/animated-gif/) - [webbanner](https://www.mygnu.de/tag/webbanner/) - [banner](https://www.mygnu.de/tag/banner/) - [marqee](https://www.mygnu.de/tag/marqee/) - [Imagemagick](https://www.mygnu.de/tag/imagemagick/) - [Laufschrift](https://www.mygnu.de/tag/laufschrift/) - [jps](https://www.mygnu.de/tag/jps/) - [stereo image](https://www.mygnu.de/tag/stereo-image/) - [anaglyph](https://www.mygnu.de/tag/anaglyph/) - [quad buffered](https://www.mygnu.de/tag/quad-buffered/) - [thinkfinger](https://www.mygnu.de/tag/thinkfinger/) - [2.6.28](https://www.mygnu.de/tag/2628/) - [usb](https://www.mygnu.de/tag/usb/) - [zen-sources](https://www.mygnu.de/tag/zen-sources/) - [marquee](https://www.mygnu.de/tag/marquee/) - [SIV](https://www.mygnu.de/tag/siv/) - [stereo](https://www.mygnu.de/tag/stereo/) - [lmage](https://www.mygnu.de/tag/lmage/) - [viewer](https://www.mygnu.de/tag/viewer/) - [Stereoscopic Image Viewer](https://www.mygnu.de/tag/stereoscopic-image-viewer/) - [quadro](https://www.mygnu.de/tag/quadro/) - [iwear](https://www.mygnu.de/tag/iwear/) - [magnetometer](https://www.mygnu.de/tag/magnetometer/) - [accelerometer](https://www.mygnu.de/tag/accelerometer/) - [calibration](https://www.mygnu.de/tag/calibration/) - [UDP](https://www.mygnu.de/tag/udp/) - [multicast](https://www.mygnu.de/tag/multicast/) - [driver](https://www.mygnu.de/tag/driver/) - [segfault](https://www.mygnu.de/tag/segfault/) - [gentoo](https://www.mygnu.de/tag/gentoo/) - [x86_64](https://www.mygnu.de/tag/x86_64/) - [vserver](https://www.mygnu.de/tag/vserver/) - [Tim Berners-Lee](https://www.mygnu.de/tag/tim-berners-lee/) - [www](https://www.mygnu.de/tag/www/) - [hypertext](https://www.mygnu.de/tag/hypertext/) - [brirthday](https://www.mygnu.de/tag/brirthday/) - [invention](https://www.mygnu.de/tag/invention/) - [proposal](https://www.mygnu.de/tag/proposal/) - [pi](https://www.mygnu.de/tag/pi/) - [download](https://www.mygnu.de/tag/download/) - [slideshow](https://www.mygnu.de/tag/slideshow/) - [HMD](https://www.mygnu.de/tag/hmd/) - [libusb](https://www.mygnu.de/tag/libusb/) - [libconfig++](https://www.mygnu.de/tag/libconfig/) - [libcurses](https://www.mygnu.de/tag/libcurses/) - [pidgin](https://www.mygnu.de/tag/pidgin/) - [icq](https://www.mygnu.de/tag/icq/) - [Vuzix VR920](https://www.mygnu.de/tag/vuzix-vr920/) - [Vuzix](https://www.mygnu.de/tag/vuzix/) - [precision](https://www.mygnu.de/tag/precision/) - [nvidia-drivers](https://www.mygnu.de/tag/nvidia-drivers/) - [tuxonice](https://www.mygnu.de/tag/tuxonice/) - [dell](https://www.mygnu.de/tag/dell/) - [openscenegraph](https://www.mygnu.de/tag/openscenegraph/) - [gnome-sensors-applet](https://www.mygnu.de/tag/gnome-sensors-applet/) - [units](https://www.mygnu.de/tag/units/) - [gconf-editor](https://www.mygnu.de/tag/gconf-editor/) - [sensors_applet_version](https://www.mygnu.de/tag/sensors_applet_version/) - [sensor_types](https://www.mygnu.de/tag/sensor_types/) - [sensor](https://www.mygnu.de/tag/sensor/) - [gnome-panel](https://www.mygnu.de/tag/gnome-panel/) - [gnome-spplets](https://www.mygnu.de/tag/gnome-spplets/) - [CD](https://www.mygnu.de/tag/cd/) - [DVD](https://www.mygnu.de/tag/dvd/) - [ISO](https://www.mygnu.de/tag/iso/) - [compare](https://www.mygnu.de/tag/compare/) - [check](https://www.mygnu.de/tag/check/) - [k3b](https://www.mygnu.de/tag/k3b/) - [awk](https://www.mygnu.de/tag/awk/) - [md5sum](https://www.mygnu.de/tag/md5sum/) - [pv](https://www.mygnu.de/tag/pv/) - [checkdisc.sh](https://www.mygnu.de/tag/checkdiscsh/) - [script](https://www.mygnu.de/tag/script/) - [compiz](https://www.mygnu.de/tag/compiz/) - [compiz-fusion-0.8.2](https://www.mygnu.de/tag/compiz-fusion-082/) - [emerge](https://www.mygnu.de/tag/emerge/) - [update](https://www.mygnu.de/tag/update/) - [masked](https://www.mygnu.de/tag/masked/) - [missing keyword](https://www.mygnu.de/tag/missing-keyword/) - [package.keywords](https://www.mygnu.de/tag/packagekeywords/) - [upgrade](https://www.mygnu.de/tag/upgrade/) - [iptables](https://www.mygnu.de/tag/iptables/) - [mirror target](https://www.mygnu.de/tag/mirror-target/) - [module](https://www.mygnu.de/tag/module/) - [firewall](https://www.mygnu.de/tag/firewall/) - [INPUT](https://www.mygnu.de/tag/input/) - [FORWARD](https://www.mygnu.de/tag/forward/) - [PREROUTING](https://www.mygnu.de/tag/prerouting/) - [xorg](https://www.mygnu.de/tag/xorg/) - [x](https://www.mygnu.de/tag/x/) - [ipw3945](https://www.mygnu.de/tag/ipw3945/) - [iwl3945](https://www.mygnu.de/tag/iwl3945/) - [Precision M5](https://www.mygnu.de/tag/precision-m5/) - [suspend to disk](https://www.mygnu.de/tag/suspend-to-disk/) - [suspend to ram](https://www.mygnu.de/tag/suspend-to-ram/) - [xorg-server](https://www.mygnu.de/tag/xorg-server/) - [nvidia-drivers-180.51](https://www.mygnu.de/tag/nvidia-drivers-18051/) - [xorg-server-1.5.3](https://www.mygnu.de/tag/xorg-server-153/) - [xorg-server-1.3](https://www.mygnu.de/tag/xorg-server-13/) - [nvidia-drivers-180.29](https://www.mygnu.de/tag/nvidia-drivers-18029/) - [2.6.29-zen3](https://www.mygnu.de/tag/2629-zen3/) - [nokia](https://www.mygnu.de/tag/nokia/) - [n810](https://www.mygnu.de/tag/n810/) - [preemptive](https://www.mygnu.de/tag/preemptive/) - [zImage](https://www.mygnu.de/tag/zimage/) - [flash](https://www.mygnu.de/tag/flash/) - [n800](https://www.mygnu.de/tag/n800/) - [n770](https://www.mygnu.de/tag/n770/) - [internet tablet](https://www.mygnu.de/tag/internet-tablet/) - [osgocean](https://www.mygnu.de/tag/osgocean/) - [water](https://www.mygnu.de/tag/water/) - [youtube](https://www.mygnu.de/tag/youtube/) - [fftss](https://www.mygnu.de/tag/fftss/) - [render](https://www.mygnu.de/tag/render/) - [java3d](https://www.mygnu.de/tag/java3d/) - [sun](https://www.mygnu.de/tag/sun/) - [jdk](https://www.mygnu.de/tag/jdk/) - [sun-java3d-bin](https://www.mygnu.de/tag/sun-java3d-bin/) - [java](https://www.mygnu.de/tag/java/) - [java.security.AccessControlException](https://www.mygnu.de/tag/java-security-accesscontrolexception/) - [java.lang.RuntimePermission modifyThreadGroup](https://www.mygnu.de/tag/java-lang-runtimepermission-modifythreadgroup/) - [util-verver](https://www.mygnu.de/tag/util-verver/) - [vserver-sources](https://www.mygnu.de/tag/vserver-sources/) - [navit](https://www.mygnu.de/tag/navit/) - [gps fix](https://www.mygnu.de/tag/gps-fix/) - [gpsd](https://www.mygnu.de/tag/gpsd/) - [ISO-8859-1](https://www.mygnu.de/tag/iso-8859-1/) - [online store](https://www.mygnu.de/tag/online-store/) - [windows](https://www.mygnu.de/tag/windows/) - [python](https://www.mygnu.de/tag/python/) - [layman](https://www.mygnu.de/tag/layman/) - [portage](https://www.mygnu.de/tag/portage/) - [2.6.30](https://www.mygnu.de/tag/2-6-30/) - [toi](https://www.mygnu.de/tag/toi/) - [Precision M65](https://www.mygnu.de/tag/precision-m65/) - [zen-sources 2.6.30-zen3](https://www.mygnu.de/tag/zen-sources-2-6-30-zen3/) - [zen-sources 2.6.30-zen4](https://www.mygnu.de/tag/zen-sources-2-6-30-zen4/) - [undervolt](https://www.mygnu.de/tag/undervolt/) - [phc](https://www.mygnu.de/tag/phc/) - [linux-phc](https://www.mygnu.de/tag/linux-phc/) - [root exploit vulnerability](https://www.mygnu.de/tag/root-exploit-vulnerability/) - [exploit](https://www.mygnu.de/tag/exploit/) - [zen-sources 2.6.31-zen1](https://www.mygnu.de/tag/zen-sources-2-6-31-zen1/) - [2.6.31](https://www.mygnu.de/tag/2-6-31/) - [seahorse](https://www.mygnu.de/tag/seahorse/) - [enigmail](https://www.mygnu.de/tag/enigmail/) - [gnome](https://www.mygnu.de/tag/gnome/) - [gpgme](https://www.mygnu.de/tag/gpgme/) - [iptables mirror target](https://www.mygnu.de/tag/iptables-mirror-target/) - [zen-sources 2.6.31-zen2](https://www.mygnu.de/tag/zen-sources-2-6-31-zen2/) - [hostname wrong](https://www.mygnu.de/tag/hostname-wrong/) - [util-vserver](https://www.mygnu.de/tag/util-vserver/) - [gimp](https://www.mygnu.de/tag/gimp/) - [distribution](https://www.mygnu.de/tag/distribution/) - [vanilla-sources](https://www.mygnu.de/tag/vanilla-sources/) - [bugs](https://www.mygnu.de/tag/bugs/) - [kvm-intel](https://www.mygnu.de/tag/kvm-intel/) - [2.6.32](https://www.mygnu.de/tag/2-6-32/) - [Avatar3D](https://www.mygnu.de/tag/avatar3d/) - [error](https://www.mygnu.de/tag/error/) - [Gent](https://www.mygnu.de/tag/gent/) - [flightgear](https://www.mygnu.de/tag/flightgear/) - [simulation](https://www.mygnu.de/tag/simulation/) - [vultures](https://www.mygnu.de/tag/vultures/) - [nethack](https://www.mygnu.de/tag/nethack/) - [RPG](https://www.mygnu.de/tag/rpg/) - [thunderbird](https://www.mygnu.de/tag/thunderbird/) - [calendar](https://www.mygnu.de/tag/calendar/) - [lightning](https://www.mygnu.de/tag/lightning/) - [thunderbird-3.0.3](https://www.mygnu.de/tag/thunderbird-3-0-3/) - [virtual identity](https://www.mygnu.de/tag/virtual-identity/) - [MR Tech Toolkit](https://www.mygnu.de/tag/mr-tech-toolkit/) - [compiz-fusion-0.8.6](https://www.mygnu.de/tag/compiz-fusion-0-8-6/) - [gtkdoc](https://www.mygnu.de/tag/gtkdoc/) - [gtk-docfixref](https://www.mygnu.de/tag/gtk-docfixref/) - [N900](https://www.mygnu.de/tag/n900/) - [maemo5 linux](https://www.mygnu.de/tag/maemo5-linux/) - [2.6.35](https://www.mygnu.de/tag/2-6-35/) - [firefox](https://www.mygnu.de/tag/firefox/) - [pulseaudio](https://www.mygnu.de/tag/pulseaudio/) - [oss](https://www.mygnu.de/tag/oss/) - [alsa](https://www.mygnu.de/tag/alsa/) - [grep](https://www.mygnu.de/tag/grep/) - [pdf](https://www.mygnu.de/tag/pdf/) - [pdfgrep](https://www.mygnu.de/tag/pdfgrep/) - [search](https://www.mygnu.de/tag/search/) - [n810 wpa](https://www.mygnu.de/tag/n810-wpa/) - [wep](https://www.mygnu.de/tag/wep/) - [wireless key](https://www.mygnu.de/tag/wireless-key/) - [quad buffered stereo](https://www.mygnu.de/tag/quad-buffered-stereo/) - [vusik](https://www.mygnu.de/tag/vusik/) - [nvidia Quadro FX](https://www.mygnu.de/tag/nvidia-quadro-fx/) - [ATI FireGL](https://www.mygnu.de/tag/ati-firegl/) - [mpo](https://www.mygnu.de/tag/mpo/) - [OpenGL](https://www.mygnu.de/tag/opengl/) - [debugger](https://www.mygnu.de/tag/debugger/) - [GLSL](https://www.mygnu.de/tag/glsl/) - [glsldevil](https://www.mygnu.de/tag/glsldevil/) - [parallax](https://www.mygnu.de/tag/parallax/) - [filter](https://www.mygnu.de/tag/filter/) - [sepia](https://www.mygnu.de/tag/sepia/) - [ATI](https://www.mygnu.de/tag/ati/) - [Intel](https://www.mygnu.de/tag/intel/) - [shader](https://www.mygnu.de/tag/shader/) - [bino](https://www.mygnu.de/tag/bino/) - [xine](https://www.mygnu.de/tag/xine/) - [overlay](https://www.mygnu.de/tag/overlay/) - [xorg.conf](https://www.mygnu.de/tag/xorg-conf/) - [ffmpeg](https://www.mygnu.de/tag/ffmpeg/) - [exiftool](https://www.mygnu.de/tag/exiftool/) - [Finepix Real 3D](https://www.mygnu.de/tag/finepix-real-3d/) - [zen-sources-toi](https://www.mygnu.de/tag/zen-sources-toi/) - [zen-sources-2.6.37_p20110325](https://www.mygnu.de/tag/zen-sources-2-6-37_p20110325/) - [BFS](https://www.mygnu.de/tag/bfs/) - [CFS brain fuck scheduler](https://www.mygnu.de/tag/cfs-brain-fuck-scheduler/) - [completely fair scheduler](https://www.mygnu.de/tag/completely-fair-scheduler/) - [stereoscopic video](https://www.mygnu.de/tag/stereoscopic-video/) - [anaglyph glasses](https://www.mygnu.de/tag/anaglyph-glasses/) - [autostereoscopic display](https://www.mygnu.de/tag/autostereoscopic-display/) - [3D TV set](https://www.mygnu.de/tag/3d-tv-set/) - [powerwall](https://www.mygnu.de/tag/powerwall/) - [zen-sources-2.6.38_p20110501](https://www.mygnu.de/tag/zen-sources-2-6-38_p20110501/) - [zen-sources-2.6.38_p20110510](https://www.mygnu.de/tag/zen-sources-2-6-38_p20110510/) - [skype](https://www.mygnu.de/tag/skype/) - [StarOffice 8](https://www.mygnu.de/tag/staroffice-8/) - [Crash](https://www.mygnu.de/tag/crash/) - [emul-linux-x86](https://www.mygnu.de/tag/emul-linux-x86/) - [emul-linux-x86-baselibs](https://www.mygnu.de/tag/emul-linux-x86-baselibs/) - [package.provided](https://www.mygnu.de/tag/package-provided/) - [emul-linux-x86-motif](https://www.mygnu.de/tag/emul-linux-x86-motif/) - [package.mask file](https://www.mygnu.de/tag/package-mask-file/) - [word processor](https://www.mygnu.de/tag/word-processor/) - [teamspeak](https://www.mygnu.de/tag/teamspeak/) - [Archlinux](https://www.mygnu.de/tag/archlinux/) - [Algorithm](https://www.mygnu.de/tag/algorithm/) - [Extensions](https://www.mygnu.de/tag/extensions/) - [Google](https://www.mygnu.de/tag/google/) - [License](https://www.mygnu.de/tag/license/) - [Pagerank](https://www.mygnu.de/tag/pagerank/) - [SEO](https://www.mygnu.de/tag/seo/) - [FlightGear-2.4.0](https://www.mygnu.de/tag/flightgear-2-4-0/) - [zen-stable-3.2](https://www.mygnu.de/tag/zen-stable-3-2/) - [zcache](https://www.mygnu.de/tag/zcache/) - [SOPA](https://www.mygnu.de/tag/sopa/) - [PIPA](https://www.mygnu.de/tag/pipa/) - [zen-stable-3.0](https://www.mygnu.de/tag/zen-stable-3-0/) - [Wikipedia](https://www.mygnu.de/tag/wikipedia/) - [unknown caller](https://www.mygnu.de/tag/unknown-caller/) - [callerid](https://www.mygnu.de/tag/callerid/) - [extcalllog](https://www.mygnu.de/tag/extcalllog/) - [phone number](https://www.mygnu.de/tag/phone-number/) - [Germany](https://www.mygnu.de/tag/germany/) - [zen-stable-3.1](https://www.mygnu.de/tag/zen-stable-3-1/) - [glxgears](https://www.mygnu.de/tag/glxgears/) - [black screen](https://www.mygnu.de/tag/black-screen/) - [qemu](https://www.mygnu.de/tag/qemu/) - [kvm](https://www.mygnu.de/tag/kvm/) - [ext4](https://www.mygnu.de/tag/ext4/) - [qcow2](https://www.mygnu.de/tag/qcow2/) - [cache](https://www.mygnu.de/tag/cache/) - [filesystem](https://www.mygnu.de/tag/filesystem/) - [image](https://www.mygnu.de/tag/image/) - [journal](https://www.mygnu.de/tag/journal/) - [MyGNU.de](https://www.mygnu.de/tag/mygnu-de/) - [anniversary](https://www.mygnu.de/tag/anniversary/) - [history](https://www.mygnu.de/tag/history/) - [future](https://www.mygnu.de/tag/future/) - [udev](https://www.mygnu.de/tag/udev/) - [devtmpfs](https://www.mygnu.de/tag/devtmpfs/) - [apache](https://www.mygnu.de/tag/apache/) - [php gentoo](https://www.mygnu.de/tag/php-gentoo/) - [apxs](https://www.mygnu.de/tag/apxs/) - [jabber](https://www.mygnu.de/tag/jabber/) - [location](https://www.mygnu.de/tag/location/) - [status message](https://www.mygnu.de/tag/status-message/) - [instant messaging](https://www.mygnu.de/tag/instant-messaging/) - [nm-nav-provider](https://www.mygnu.de/tag/nm-nav-provider/) - [nokiamaps-navigation-provider](https://www.mygnu.de/tag/nokiamaps-navigation-provider/) - [FlightGear-2.8.0](https://www.mygnu.de/tag/flightgear-2-8-0/) - [DLNA](https://www.mygnu.de/tag/dlna/) - [ushare](https://www.mygnu.de/tag/ushare/) - [minidlna](https://www.mygnu.de/tag/minidlna/) - [3d photos](https://www.mygnu.de/tag/3d-photos/) - [LG 55LA6608](https://www.mygnu.de/tag/lg-55la6608/) - [devolo](https://www.mygnu.de/tag/devolo/) - [dlan 1200](https://www.mygnu.de/tag/dlan-1200/) - [PowerLAN](https://www.mygnu.de/tag/powerlan/) - [LG](https://www.mygnu.de/tag/lg/) - [LG TV](https://www.mygnu.de/tag/lg-tv/) - [Spam](https://www.mygnu.de/tag/spam/) - [mygnu](https://www.mygnu.de/tag/mygnu/) - [linux](https://www.mygnu.de/tag/linux/) - [3d](https://www.mygnu.de/tag/3d/) - [kernel](https://www.mygnu.de/tag/kernel/) - [maths](https://www.mygnu.de/tag/maths/) - [security](https://www.mygnu.de/tag/security/) - [maemo](https://www.mygnu.de/tag/maemo/) - [maemo5](https://www.mygnu.de/tag/maemo5/) - [android](https://www.mygnu.de/tag/android/) - [Gemini](https://www.mygnu.de/tag/gemini/) - [PDA](https://www.mygnu.de/tag/pda/) - [micro sd card](https://www.mygnu.de/tag/micro-sd-card/) - [performance](https://www.mygnu.de/tag/performance/) - [speed](https://www.mygnu.de/tag/speed/) - [Jetson TX2](https://www.mygnu.de/tag/jetson-tx2/) - [auto power on](https://www.mygnu.de/tag/auto-power-on/) - [house automation](https://www.mygnu.de/tag/house-automation/) - [fhem](https://www.mygnu.de/tag/fhem/) - [sensors](https://www.mygnu.de/tag/sensors/) - [libreoffice](https://www.mygnu.de/tag/libreoffice/) - [Debian](https://www.mygnu.de/tag/debian/) - [apt](https://www.mygnu.de/tag/apt/) - [failure](https://www.mygnu.de/tag/failure/) - [awus1900](https://www.mygnu.de/tag/awus1900/) - [Lamobo R1](https://www.mygnu.de/tag/lamobo-r1/) - [Bananapi](https://www.mygnu.de/tag/bananapi/) - [Cosmo](https://www.mygnu.de/tag/cosmo/) - [Communicator](https://www.mygnu.de/tag/communicator/) - [modules](https://www.mygnu.de/tag/modules/) - [exfat](https://www.mygnu.de/tag/exfat/) - [Magic 2](https://www.mygnu.de/tag/magic-2/) - [freeukraine](https://www.mygnu.de/tag/freeukraine/) - [Astro Slide](https://www.mygnu.de/tag/astro-slide/) ## Download Categories - [GPL](https://www.mygnu.de/?dlm_download_category=gpl) - [cc-by-nc-sa](https://www.mygnu.de/?dlm_download_category=cc-by-nc-sa) - [Free Download](https://www.mygnu.de/?dlm_download_category=free-download)